Mechanical terminal lug · 14-6 AWG Cu/Al · I-beam 1-hole · Ilsco T· 6-I

What this product is for

The Ilsco TA-6-I is a dual-rated mechanical terminal lug used to terminate one 14-6 AWG copper or aluminium conductor onto a stud-mounted connection point. It is commonly used in control panels, distribution equipment, junction boxes, and other power or bonding terminations where a compact mechanical lug is required.

Use for

Use for terminating one conductor on equipment with a 1/4 in stud connection. It is suitable for copper or aluminium conductors, making it useful for service work, panel retrofits, OEM assemblies, and mixed-conductor applications where the connector must be CSA certified and UL listed.

Avoid for

Avoid using this lug outside its listed conductor range, voltage rating, or temperature rating. Do not use where a 2-hole lug, larger wire range, or a different mounting hole size is required.

Best for

Best for electricians and panel builders who need a compact 1-hole mechanical lug for 14-6 AWG terminations with either copper or aluminium conductors. The I-beam body helps reduce connector bulk while maintaining the required connection performance.

Installed in

Typically installed in control panels, switchboards, junction boxes, machinery, and other electrical equipment with stud-mounted termination points. The body measures approximately 0.82 in x 0.437 in x 0.44 in (about 21 x 11 x 11 mm), which helps in tighter equipment layouts.

Why this product exists

This lug provides a field-installable mechanical termination for one conductor without crimp tooling. It is dual-rated for copper and aluminium conductors, uses electro-tin plating to support reliable contact, and offers a compact alternative to larger full-body lugs.

Compared with similar products

Compared with larger mechanical lugs, the TA-6-I is intended for smaller conductor ranges and a compact footprint. Compared with compression lugs, it installs mechanically and is commonly chosen where serviceability or field changes are important. For aluminium terminations, DE-OX inhibitor is commonly recommended by the manufacturer. Actual installation requirements depend on conductor type, torque, and local electrical code.

Specifications

• Manufacturer part number: TA-6-I
• Brand: Ilsco
• Series: TA-I
• Product type: Dual-rated mechanical terminal lug
• Conductor range: 14-6 AWG
• Conductor material: Copper or aluminium
• Number of conductors: 1
• Number of mounting holes: 1
• Stud size: 1/4 in
• Mounting hole diameter: 0.203 in (about 5.2 mm)
• Tongue type: Straight
• Material: 6061-T6 aluminium alloy
• Finish: Electro-tin plated
• Voltage rating: 600 VAC
• Temperature rating: 90 deg C
• Approximate dimensions: 0.82 in L x 0.437 in W x 0.44 in H (about 21 x 11 x 11 mm)
• Listings: CSA certified, UL listed