Stock 1

Voltage Transducer · 0-300 VAC input selectable 0-1 mA/0-5 VDC/0-10 VDC DIN rail mount · FLEX-CORE MVT-300A

SKU: FC-MVT-300A

AC voltage transducer for converting 0-300 VAC to a field-selectable analog DC output of 0-1 mA, 0-5 VDC, or 0-10 VDC. Commonly used in control panels, OEM measurement systems, and monitoring applications where a slim 1 in (25 mm) DIN rail package and self-powered operation help simplify installation.

What this product is for

The FLEX-CORE MVT-300A is an AC voltage transducer used to convert a 0-300 VAC input into a proportional analog DC signal for monitoring, metering, and control systems. It is designed for industrial panels and OEM equipment where voltage needs to be brought into a PLC, controller, or monitoring device as a standard analog signal.

Use for

Monitoring 0-300 VAC circuits in control panels
Sending voltage signal feedback to PLCs, meters, and building or process control systems
OEM measurement systems
Applications using DIN rail mounting in tight enclosures
Installations using potential transformers where required by the system design

Avoid for

Applications above 300 VAC input range
Systems requiring a digital communications output instead of analog
Applications needing a 4-20 mA output from this exact A-suffix model
Outdoor or washdown locations unless installed in a suitable enclosure

Best for

Best for electricians, panel builders, and automation technicians who need a compact voltage transducer with selectable analog output and DIN rail mounting. The 1 in (25 mm) wide housing helps when enclosure space is limited.

Installed in

Typically installed in industrial control panels, OEM equipment, power monitoring assemblies, and electrical enclosures. The case mounts on EN50035 or EN50022 DIN rail and uses recessed terminals for added finger safety in panel environments.

Why this product exists

This product converts an AC voltage signal into a stable analog DC output that is easier for control and monitoring equipment to read. It helps bridge line-voltage measurement points and low-level analog inputs used by automation hardware.

Typical buying guidance: selectable outputs can reduce stocking complexity when the receiving device may accept either current or voltage analog input. Actual compatibility depends on the input type and scaling requirements of the connected controller or meter.

Compared with similar products

Compared with fixed-output transducers, the MVT-300A offers DIP-switch selectable 0-1 mA, 0-5 VDC, or 0-10 VDC output in one model. Compared with larger transducers, its slim DIN rail form factor is better suited to crowded enclosures. If your application requires 4-20 mA, a different model in the same series is typically used.

Specifications

Brand: FLEX-CORE
Manufacturer part number: MVT-300A
Product type: AC voltage transducer
Input range: 0-300 VAC
Output: DIP-switch selectable 0-1 mADC, 0-5 VDC, or 0-10 VDC
Power type: Self-powered from measured AC input line
Accuracy at 60 Hz: plus or minus 0.25% full scale
Frequency range: 48-65 Hz
Response time at 99%: 400 ms
Output ripple: less than 1.0% full scale
Burden: 2.0 VA
Temperature effect: -20 degC to +65 degC, plus or minus 1.0%
Mounting: DIN rail, EN50035 or EN50022
Case width: 1 in (25 mm)
Housing: Polyamide DIN mount case
Weight: 0.25 lb (0.11 kg)
Notes: Output is derived from the absolute value of the input and calibrated as the RMS value of a sine wave input.

- SKU
  FC-MVT-300A
- Manufacturer Part #
  MVT-300A
Mounting
DIN rail, EN50035 or EN50022
Weight
0.25 lb (0.11 kg)
Output
DIP-switch selectable 0-1 mADC, 0-5 VDC, or 0-10 VDC
Notes
Output is derived from the absolute value of the input and calibrated as th
Housing
Polyamide DIN mount case
Frequency Range
48-65 Hz
Input Range
0-300 VAC
Brands
FLEX-CORE
Stock in Elmira
1

Aptico Supply Delivery

Fast Electrical Supply Delivery Across Ontario

Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.

Shop Products Ask About Delivery

Real-Time Inventory

Contractor Delivery Routes

Elmira & Flesherton Pickup

Local Ontario Service

Delivery Built Around Electrical Contractors

Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.

Free Daily Delivery

Free daily delivery is available for larger contractor accounts.

Order by 9:00 AM for morning delivery
Order by 2:00 PM for afternoon delivery
Available in qualifying local delivery areas

Free Weekly Delivery

Free weekly delivery is available for smaller accounts in select service areas.

Elmira area delivery: Tuesday
Flesherton area delivery: Thursday
Order by 11:00 AM on the route day

Pickup Options

Pickup is available from our Ontario locations for customers who prefer to collect their order directly.

Elmira pickup available
Flesherton pickup available
Call ahead for large or special-order items

Local Delivery Areas

See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.

Delivery Questions

Do you offer free delivery?

Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.

Can I pick up my order?

Yes, pickup is available from our Elmira and Flesherton locations.

Do delivery charges apply?

Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.

Can you deliver to jobsites?

Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.

Need Electrical Supplies Delivered?

Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.

Contact Aptico Supply

We accept the following payment methods:

Accepted payment methods

To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.

This page is intended for your policy regarding returns and refunds.

Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.

To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.