PVC Conduit Body Type LL · 1-1/4 Inch PVC Fitting · IPEX SLL40S

What this product is for

This Type LL access fitting is used on 1-1/4 in rigid PVC conduit runs to change direction while maintaining access for pulling, splicing where permitted, and maintenance. It is part of the IPEX Scepter conduit fitting system for nonmetallic raceway installations.

Use for

Use for 1-1/4 in PVC conduit runs in residential, commercial and industrial work where you need a left-hand conduit body with removable cover access. Commonly used where conductors need to be pulled through a change in direction and where wet-location rated PVC fittings are required.

Avoid for

Avoid using this fitting with non-matching conduit systems or where a different conduit body pattern such as LB, LR, T or C is required. Do not assume box fill or splice capacity beyond code allowances for the specific installation.

Best for

Best for electricians standardizing on IPEX Scepter rigid PVC conduit and fittings in corrosive, damp or outdoor environments. It suits installations that need nonconductive PVC raceway components and repeat access to conductors through the removable cover.

Installed in

Typically installed in exposed or concealed PVC conduit systems in commercial buildings, residential projects, service areas, utility spaces and outdoor runs. Wet-location suitability should still be matched to the complete raceway design and local code requirements.

Why this product exists

This fitting provides directional change and conductor access in one component, reducing the need to disassemble conduit runs for pulling or inspection. Factory-supplied brass inserts, screws, gasket and cover help simplify installation and maintenance.

Compared with similar products

Compared with straight couplings or elbows, a Type LL conduit body adds access through a removable cover. Compared with LB or LR styles, the LL pattern is selected when the conduit layout requires that specific left-hand entry orientation. Using the same manufacturer across the conduit system is commonly preferred for fit and certification consistency.

Specifications

• Brand: IPEX
• Series: Scepter
• Manufacturer part number: SLL40S
• Product code: 077524
• Product type: Type LL access fitting / conduit body
• Trade size: 1-1/4 in
• Approximate metric trade size: 32 mm
• Material: PVC
• Colour: Grey, typical for rigid PVC electrical fittings
• Certification: CSA certified
• Listing: UL listed for wet locations
• Supplied with: Threaded brass inserts, combination brass head screws, PVC gasket and cover
• UPC: 622454775244
• Country of origin: Canada
• Published dimensions for 1-1/4 in size: A 7.9 in (about 201 mm), F 7.6 in (about 193 mm), G 5.8 in (about 147 mm), J 4.0 in (about 102 mm)

Typical buying note: conduit bodies like this are commonly selected to improve wire pulling access on direction changes, but actual conductor fill and installation suitability depend on conductor size, insulation type, bend layout and local electrical code.