Pull Elbow Emt to Box · 1/2 Inch EMT or Rigid 90 Degree Pull Elbow · .5EMT90PTA
1/2 in EMT pull elbow for EMT-to-box terminations with a 90 deg change of direction. Zinc die-cast construction and removable cover style are commonly used to simplify wire pulling and access in tight box entries.
What this product is for
This pull elbow is used to connect 1/2 in EMT conduit to an electrical box or enclosure where a 90 deg turn is needed at the entry point. It is intended for conduit runs where easier conductor pulling and service access are important.
Use for
Use for 1/2 in EMT-to-box connections in commercial, institutional, and residential electrical work. Commonly selected where wall space is limited, the conduit must turn directly into a box, or future access to conductors is helpful.
Avoid for
Avoid using this item where a raintight fitting, threaded rigid/IMC fitting, or a different conduit type is required. Confirm listing and fitting style before use in wet locations or where project specifications call for a gasketed or specifically certified assembly.
Best for
Best for electricians needing a compact 90 deg EMT box entry with pull access. A removable cover style is typically preferred when conductor pulling, inspection, or later circuit changes are expected.
Installed in
Installed in EMT raceway systems terminating at boxes, cabinets, and enclosures. Suitable for 1/2 in trade size EMT, approximately 16 mm metric equivalent.
Why this product exists
This fitting provides a practical way to change direction into a box without making a tight field bend at the enclosure entry. It can reduce pulling difficulty and help protect conductor insulation during installation.
Compared with similar products
Compared with a standard straight EMT connector, a pull elbow gives a 90 deg entry and typically improves access for pulling conductors. Compared with conduit bodies, it is a more compact fitting for direct box terminations. Actual installation suitability depends on box layout, conductor count, bend limits, and local electrical code.
Specifications
- Product type: EMT pull elbow connector
- Trade size: 1/2 in (approximately 16 mm)
- Connection style: EMT to box
- Angle: 90 deg
- Material: Zinc die cast body
- Typical feature: Removable cover for wire pulling access
- Application: Conduit termination at box or enclosure
- Standards reference seen on comparable listings: UL 514B or UL Canada and US approval, depending on manufacturer
- ApplicationConduit termination at box or enclosure
- MaterialZinc die cast body
- Trade Size1/2 in (approximately 16 mm)
- Angle90 deg
- Connection StyleEMT to box
- BrandsBridgeport Fittings
- Stock in Elmira3
- Stock in Flesherton8
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.