Combination Conduit Body - 1/2 in EMT LL & LR Fitting With Cover and Gasket - .5EMTLLR

What this product is for

This 1/2 in LR conduit body is used on EMT and rigid/IMC conduit runs where you need a right-hand change of direction with access to pull conductors or inspect the raceway. It fits the common combo style used for threaded rigid/IMC and EMT applications.

Use for

Use for commercial, institutional, and light industrial conduit runs where access is needed at a change in direction. Typical applications include branch circuits, equipment feeds, and exposed raceway work where a compact pull point is preferred.

Avoid for

Avoid using this as a substitute for a junction box where conductor fill, splicing space, or device mounting requirements call for a box. Always confirm box fill, conductor bending space, and local code requirements for the intended installation.

Best for

Best for electricians needing a compact LR body for 1/2 in conduit where service access matters. A conduit body can also help reduce difficult bends in short runs and simplify future maintenance.

Installed in

Installed in exposed conduit systems in commercial buildings, service areas, mechanical rooms, workshops, and similar indoor or outdoor locations, depending on the exact enclosure rating, cover, and gasket supplied.

Why this product exists

It provides an accessible point in the raceway so conductors can be pulled through a change in direction without opening up the full conduit run. For 1/2 in EMT, a common rule of thumb is to watch conduit fill and pulling difficulty on tighter runs; actual pulling performance depends on conductor count, insulation type, bend layout, and site conditions.

Compared with similar products

Compared with a straight C body, an LR body changes direction while still providing access. Compared with rigid-only bodies, combo EMT/rigid styles are commonly selected when the installer wants one body suitable for threaded rigid/IMC or EMT connections, subject to the exact hub design and fitting method.

Specifications

• Trade size: 1/2 in (16 mm nominal)
• Type: LR conduit body
• Application: EMT and rigid/IMC combo style
• Typical material on comparable listings: aluminium die cast
• Typical included components on comparable listings: cover and gasket
• Typical use: pulling access and direction change in conduit runs
• Approximate comparable dimensions found online: about 4.3 to 4.6 in L x 2.0 in W x 1.3 to 1.4 in H (109 to 117 mm x 51 to 52 mm x 33 to 36 mm)

Note: Brand, exact material, certifications, and package contents could not be confirmed directly from the SKU alone and should be verified before purchase.