Conduit clamp and wall spacer · 1/2 Inch PVC Clamp · IPEX CCS10
Non-metallic conduit clamp and wall spacer for 1/2 in rigid PVC conduit runs. Commonly used to support Scepter conduit while allowing proper stand-off from the mounting surface; check support spacing and installation method against local code and the conduit system requirements.
What this product is for
The CCS10 is a non-metallic conduit clamp and wall spacer for securing 1/2 in rigid PVC conduit to a wall, strut, or similar mounting surface. It is part of the IPEX Scepter conduit support system and is used where a clean stand-off and compatible PVC support are required.
Use for
Use for 1/2 in rigid PVC conduit in residential, commercial, and industrial electrical raceway installations. Suitable where corrosion resistance and non-metallic support hardware are preferred, including damp or outdoor locations when used as part of a rated conduit system.
Avoid for
Avoid using this clamp on conduit sizes other than 1/2 in, or where a metallic support system is specifically required by the design. Do not treat this accessory as a substitute for code-required support spacing, expansion fittings, or system-specific installation requirements.
Best for
Best for Scepter rigid PVC conduit runs where electricians need a matching non-metallic clamp with built-in spacing from the wall. It is also a practical choice where corrosion resistance matters more than metal strapping.
Installed in
Typically installed on walls, strut, utility spaces, service areas, and exposed conduit runs. Common applications include indoor electrical rooms, exterior walls, and light industrial environments.
Why this product exists
This clamp helps secure PVC conduit without introducing a dissimilar metallic support at the contact point. Manufacturer literature indicates these clamps and spacers are engineered to accommodate proper expansion and contraction of PVC conduit and to help prevent unwanted clamp opening.
Compared with similar products
Compared with a basic two-hole strap, this style combines clamping and wall spacing in one accessory. For PVC conduit systems, this can simplify mounting and maintain consistent stand-off. As typical guidance, conduit support accessories should be selected as part of the full raceway system, and actual performance depends on installation conditions, layout, and local electrical code.
Specifications
- Brand: IPEX
- Manufacturer series: Scepter
- Manufacturer part number: CCS10
- Product type: Conduit clamp and wall spacer
- Trade size: 1/2 in
- Metric equivalent: approximately 16 mm
- Material: Non-metallic PVC
- Colour: Gray
- For use with: Rigid PVC conduit
- Mounting: Wall or strut mounting
- Length: 2.414 in (approximately 61 mm)
- Reference dimensions: X 1.191 in (approximately 30 mm), Z 1.824 in (approximately 46 mm)
- Manufacturer product code: 077794
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.