Rigid PVC Conduit · 1/2 Inch x 10 ft CSA listed grey electrical conduit · Next Polymers 117001-118

What this product is for

This rigid PVC electrical conduit is used to route and protect insulated conductors in nonmetallic raceway systems. The 1/2 in trade size is commonly selected for branch circuit runs, short outdoor feeds, and general-purpose conduit work where a grey Schedule 40 raceway is acceptable.

Use for

Use for residential and light commercial conduit runs, underground raceways, and outdoor installations where PVC conduit is permitted by code. Sold by 10 ft (3.05 m) length for standard field handling and cutting.

Avoid for

Avoid where a heavier-wall raceway such as Schedule 80 is required for higher physical protection, or where metallic conduit is specified for bonding, shielding, or site standards. Always confirm local code and project requirements before selection.

Best for

Best for electricians and contractors needing a corrosion-resistant nonmetallic raceway for indoor, outdoor, or below-grade conduit runs. It is a practical choice where lighter weight and easier handling than steel conduit help speed installation.

Installed in

Typically installed in residential construction, commercial tenant work, service raceways, slab or trench runs, and exterior wall or equipment feeds where PVC conduit is permitted.

Why this product exists

PVC Schedule 40 conduit provides a code-recognized raceway option that resists corrosion and moisture while remaining easier to cut, join, and handle than metal conduit. For many standard runs, it helps reduce installation effort without changing conductor protection intent.

Compared with similar products

Compared with EMT or rigid metal conduit, PVC conduit is nonmetallic and commonly chosen where corrosion resistance matters. Compared with Schedule 80 PVC, Schedule 40 is typically used where the installation does not require the added wall thickness and impact resistance of Schedule 80. As a rule of thumb, conduit fill should generally stay within code limits, commonly up to 40 percent depending on conductor count and type. Actual fill and compliance depend on conductor dimensions, fittings, and local electrical code.

Specifications

• Product type: Rigid PVC electrical conduit
• Trade size: 1/2 in
• Metric reference size: approximately 16 mm trade size class
• Schedule: 40
• Colour: Grey
• Length: 10 ft (3.05 m)
• Brand: Next Polymers
• Manufacturer part number: 117001-118
• Application: Electrical raceway for conductor protection