Stock 2

Fender Washer 1/4 in x 1-1/4 in zinc-plated steel FENWZ14125

SKU: S-FENWZ14125

Zinc-plated steel fender washer sized for 1/4 in fasteners with a 1-1/4 in outside diameter. Commonly used to spread load over a larger surface area, cover oversized holes, and reduce pull-through on sheet metal, enclosures, and panel work.

What this product is for

This zinc-plated steel fender washer is used with 1/4 in bolts, screws, or threaded rod where a larger bearing surface is needed. The wide outside diameter helps distribute clamping force across thin material, sheet metal, plastic, or oversized holes.

Use for

Use for electrical enclosures, panel hardware, strut accessories, sheet metal fastening, sign mounting, and general repair work. It is commonly selected when a standard flat washer does not provide enough surface coverage.

Avoid for

Avoid for highly corrosive environments, washdown areas, or exterior coastal locations where stainless steel hardware is typically a better choice. Do not use as a locking washer where vibration resistance is required.

Best for

Best for contractors and electricians who need a simple way to reduce pull-through and support thin materials during fastening. Typical trade use is under the head of a bolt or under a nut to spread the load over a wider area.

Installed in

Installed in indoor electrical rooms, commercial fit-outs, service spaces, maintenance work, and light exterior applications where zinc-plated steel is acceptable.

Why this product exists

Fender washers are made with a relatively small inside diameter and a larger outside diameter so the fastener load is spread across more surface area. This helps protect softer materials and can help bridge oversized or irregular holes.

Compared with similar products

Compared with a standard flat washer, a fender washer provides more coverage and better load distribution. Compared with stainless steel versions, zinc-plated steel is typically more economical for dry or lightly exposed locations. Actual corrosion performance depends on installation conditions and environment.

Specifications

Product type: Fender washer
Fastener size: 1/4 in nominal
Outside diameter: 1-1/4 in approximately (31.8 mm)
Inside diameter: approximately 0.28 to 0.29 in (about 7.1 to 7.4 mm) based on common 1/4 in fender washer standards
Material: Steel
Finish: Zinc-plated
Application: Load distribution, oversized hole coverage, thin material support
Typical thickness: approximately 0.055 to 0.070 in (about 1.4 to 1.8 mm) for common 1/4 in x 1-1/4 in fender washers

Estimated dimensional ranges above reflect common industry listings for this washer size. Actual dimensions may vary by manufacturer and packaging.

- SKU
  S-FENWZ14125
- Manufacturer Part #
  FENWZ14125
Application
Load distribution, oversized hole coverage, thin material support
Material
Steel
Finish
Zinc-plated
Outside Diameter
1-1/4 in approximately (31.8 mm)
Typical Thickness
approximately 0.055 to 0.070 in (about 1.4 to 1.8 mm) for common 1/4 in x 1
Inside Diameter
approximately 0.28 to 0.29 in (about 7.1 to 7.4 mm) based on common 1/4 in
Brands
White Label
Stock in Elmira
2

Aptico Supply Delivery

Fast Electrical Supply Delivery Across Ontario

Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.

Shop Products Ask About Delivery

Real-Time Inventory

Contractor Delivery Routes

Elmira & Flesherton Pickup

Local Ontario Service

Delivery Built Around Electrical Contractors

Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.

Free Daily Delivery

Free daily delivery is available for larger contractor accounts.

Order by 9:00 AM for morning delivery
Order by 2:00 PM for afternoon delivery
Available in qualifying local delivery areas

Free Weekly Delivery

Free weekly delivery is available for smaller accounts in select service areas.

Elmira area delivery: Tuesday
Flesherton area delivery: Thursday
Order by 11:00 AM on the route day

Pickup Options

Pickup is available from our Ontario locations for customers who prefer to collect their order directly.

Elmira pickup available
Flesherton pickup available
Call ahead for large or special-order items

Local Delivery Areas

See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.

Delivery Questions

Do you offer free delivery?

Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.

Can I pick up my order?

Yes, pickup is available from our Elmira and Flesherton locations.

Do delivery charges apply?

Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.

Can you deliver to jobsites?

Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.

Need Electrical Supplies Delivered?

Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.

Contact Aptico Supply

We accept the following payment methods:

Accepted payment methods

To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.

This page is intended for your policy regarding returns and refunds.

Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.

To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.