Stock 14

Liquidtight Connector 1 in · 90 deg angle · Non-metallic nylon · Nesco P493

SKU: NES-P493

1 in non-metallic 90 deg liquidtight connector for terminating flexible non-metallic liquidtight tubing in wet or dry locations. Commonly used where a right-angle entry helps in tight equipment spaces; actual fit and code acceptance depend on conduit type, enclosure, and installation conditions.

What this product is for

The Nesco P493 is a 1 in non-metallic 90 deg liquidtight connector used to terminate flexible non-metallic liquidtight tubing to boxes or enclosures where a sealed right-angle connection is needed.

Use for

Use for flexible non-metallic liquidtight tubing in wet or dry locations, especially where straight clearance is limited and a 90 deg turn helps routing into panels, disconnects, control boxes, or outdoor equipment.

Avoid for

Avoid using this connector with conduit types it is not listed for, or where a metallic fitting is specifically required by the installation method, bonding needs, or local electrical code.

Best for

Best for electricians and contractors needing a corrosion-resistant non-metallic fitting for liquidtight flexible non-metallic conduit runs in compact spaces. A 90 deg connector is typically chosen when side entry reduces bend stress and improves cable routing.

Installed in

Typically installed in industrial, commercial, agricultural, and outdoor electrical work, including equipment connections exposed to moisture, oil, or washdown conditions. Common enclosure entry size is 1 in trade size.

Why this product exists

This fitting provides a liquidtight termination while changing direction at the enclosure entry point. Compared with a straight connector, the 90 deg body can simplify layout where wall clearance or equipment depth is limited.

Compared with similar products

Compared with straight liquidtight connectors, this 90 deg version helps in tighter spaces but may require more planning for pull path and fitting clearance. Compared with metallic liquidtight fittings, a nylon body is commonly selected where corrosion resistance and non-metallic construction are preferred.

Specifications

Manufacturer: Nesco
Manufacturer part number: P493
Product type: 90 deg liquidtight connector
Trade size: 1 in
Angle: 90 deg
Material: Nylon 6/6, non-metallic
Colour: Gray
Use with: Flexible non-metallic liquidtight tubing
Location rating: Wet and dry locations
Performance description: Liquidtight, raintight, oiltight
Certification: cULus
Approximate dimensions: 2.25 in x 2.81 in x 1.50 in (57 x 71 x 38 mm)
Typical buying note: Use a 90 deg fitting where enclosure clearance is limited; confirm knockout, thread compatibility, and conduit type before ordering.
Guidance only: Actual performance depends on installation conditions, enclosure design, conduit selection, and local electrical code.

- SKU
  NES-P493
- Manufacturer Part #
  P493
Colour
Gray
Trade Size
1 in
Material
Nylon 6/6, non-metallic
Dimensions
2.25 in x 2.81 in x 1.50 in (57 x 71 x 38 mm)
Approvals
cULus
Typical Buying Note
Use a 90 deg fitting where enclosure clearance is limited; confirm knockout
Angle
90 deg
Location Rating
Wet and dry locations
Guidance Only
Actual performance depends on installation conditions, enclosure design, co
Use With
Flexible non-metallic liquidtight tubing
Brands
Nesco
Stock in Elmira
7
Stock in Flesherton
7

Aptico Supply Delivery

Fast Electrical Supply Delivery Across Ontario

Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.

Shop Products Ask About Delivery

Real-Time Inventory

Contractor Delivery Routes

Elmira & Flesherton Pickup

Local Ontario Service

Delivery Built Around Electrical Contractors

Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.

Free Daily Delivery

Free daily delivery is available for larger contractor accounts.

Order by 9:00 AM for morning delivery
Order by 2:00 PM for afternoon delivery
Available in qualifying local delivery areas

Free Weekly Delivery

Free weekly delivery is available for smaller accounts in select service areas.

Elmira area delivery: Tuesday
Flesherton area delivery: Thursday
Order by 11:00 AM on the route day

Pickup Options

Pickup is available from our Ontario locations for customers who prefer to collect their order directly.

Elmira pickup available
Flesherton pickup available
Call ahead for large or special-order items

Local Delivery Areas

See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.

Delivery Questions

Do you offer free delivery?

Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.

Can I pick up my order?

Yes, pickup is available from our Elmira and Flesherton locations.

Do delivery charges apply?

Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.

Can you deliver to jobsites?

Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.

Need Electrical Supplies Delivered?

Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.

Contact Aptico Supply

We accept the following payment methods:

Accepted payment methods

To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.

This page is intended for your policy regarding returns and refunds.

Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.

To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.