- Stock 80
:
from
to
Clear
Clear
Conduit clamp and wall spacer · 1 Inch PVC Clamp · IPEX CCS20
SKU: IPE-CCS20
Non-metallic conduit clamp and wall spacer for 1 in rigid PVC conduit in Scepter systems. Commonly used to secure conduit to walls while maintaining spacing for a clean run; actual fit and spacing should be confirmed against the conduit system and installation method.
What this product is for
The IPEX CCS20 is a non-metallic conduit clamp and wall spacer for supporting 1 in rigid PVC conduit in Scepter electrical raceway systems. It helps secure conduit to a mounting surface while maintaining stand-off spacing.
Use for
Use for exposed PVC conduit runs on walls, service spaces, utility areas, and other installations where 1 in trade size rigid PVC conduit needs mechanical support. Suitable where non-corroding support hardware is preferred.
Avoid for
Avoid using this clamp with the wrong trade size conduit, with metallic conduit, or where the support method does not match local code and site conditions. Do not treat dimensional guidance as a substitute for the manufacturer installation requirements.
Best for
Best for electricians and contractors installing Scepter rigid PVC conduit in residential, commercial, and industrial environments where corrosion resistance and non-conductive support are important.
Installed in
Typically installed on walls, ceilings, or structural surfaces in indoor or outdoor conduit runs. Scepter PVC fittings are commonly used in exposed, concrete-encased, and direct burial systems, but the clamp itself should be applied only where the support detail is appropriate for the run.
Why this product exists
This clamp is designed to hold PVC conduit in place and provide wall spacing while accommodating normal PVC conduit expansion and contraction. Typical trade benefit: non-metallic supports help reduce corrosion concerns in damp or chemical-prone areas.
Compared with similar products
Compared with metal straps, this non-metallic clamp is intended for Scepter PVC conduit systems and offers a corrosion-resistant, non-conductive support option. Compared with generic clamps, this part is size-matched to 1 in trade size conduit and is part of the Scepter fitting family.
Specifications
- Brand: IPEX
- Manufacturer part number: CCS20
- Product code: 077797
- Product family: Scepter rigid PVC fittings
- Product type: Conduit clamp and wall spacer
- Trade size: 1 in
- Metric trade size: approximately 25 mm
- Material: non-metallic PVC
- Mounting: screw mount
- Standards: CSA C22.2 No. 18.4, UL 2239
- Country of origin: Canada
- Approximate dimensions: 2.96 in L x 2.44 in H x 1.22 in projection (75 x 62 x 31 mm)
Typical guidance only: support spacing and installation layout depend on conduit type, temperature movement, loading, and local electrical code.
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.
Related products
- Stock 651
