Close Nipple · 1 in Trade Size · Rigid/IMC Threaded Coupling Piece · 1XCLOSE

What this product is for

This close nipple is used to join threaded rigid metal conduit or IMC components where very short engagement length is required. It is typically selected when boxes, cabinets, or fittings need to be connected with minimal stand-off.

Use for

Use for threaded raceway connections between enclosures, pull boxes, cabinets, and rigid or IMC fittings. It is commonly used in commercial and industrial conduit runs where space is tight.

Avoid for

Avoid using this item where a longer nipple is needed for locknut, bushing, or spacing requirements, or where the required material or corrosion protection is unknown. Do not assume finish, certification, or exact overall length from the SKU alone.

Best for

Best for electricians needing a compact threaded connection in rigid conduit systems. A close nipple is typically chosen when standard nipple lengths would leave too much spacing between connected components.

Installed in

Installed in electrical rooms, service areas, commercial tenant fit-outs, industrial facilities, and other threaded metal raceway applications. Typical installations include panel-to-trough, box-to-box, or enclosure-to-fitting connections.

Why this product exists

It provides a short threaded joining section for rigid/IMC raceway systems when space is limited. In trade use, close nipples help maintain compact equipment layouts while preserving a threaded metal raceway path.

Compared with similar products

Compared with standard-length nipples, a close nipple is used where the shortest practical spacing is needed. Compared with chase nipples, this style is generally associated with threaded rigid or IMC connections rather than thin-wall pass-through applications. Selection should be based on conduit type, thread compatibility, and installation method.

Specifications

• Product type: Close nipple
• Trade size: 1 in (27 mm nominal trade size)
• Application: Threaded rigid conduit or IMC connections
• Connection style: Male threaded ends
• Typical use: Minimum spacing between boxes, cabinets, or fittings
• Category: Conduit fittings

Typical trade guidance: close nipples are commonly used where compact enclosure-to-enclosure connections are needed. Actual fit and compliance depend on thread standard, wall thickness, locknut/bushing requirements, and local electrical code.