Rigid PVC Conduit · 1 Inch x 10 ft CSA listed grey electrical conduit · Next Polymers 117021-118

What this product is for

This 1 in Schedule 40 rigid PVC conduit is used to route and protect electrical conductors in residential, commercial, and light industrial raceway systems. It is suited to installations where a nonmetallic, corrosion-resistant conduit is preferred.

Use for

Use for exposed or concealed raceways, underground runs, and concrete encasement where Schedule 40 PVC conduit is permitted by code. Typical applications include service runs, branch circuit raceways, and outdoor wiring pathways using solvent-weld PVC fittings.

Avoid for

Avoid where a heavier-wall raceway such as Schedule 80 is required for greater physical protection, or where metallic conduit is specified for bonding, shielding, or site standards. Do not use plumbing pipe in place of electrical conduit.

Best for

Best for electricians and contractors needing a 10 ft (3.05 m) grey PVC raceway that is easy to cut, join, and install in corrosive or damp environments. It is a practical choice for outdoor and below-grade work where rust resistance matters.

Installed in

Installed in homes, commercial buildings, utility areas, exterior walls, slabs, and underground trench runs. Commonly paired with PVC couplings, adapters, elbows, and solvent cement listed for electrical conduit systems.

Why this product exists

Rigid PVC conduit provides a nonmetallic raceway option for protecting conductors while resisting moisture and corrosion. Compared with metal raceway, it is often chosen where soil contact, damp locations, or chemical exposure make nonmetallic conduit a better fit.

Compared with similar products

Compared with EMT, PVC conduit does not rust and is commonly selected for underground or wet-location work. Compared with Schedule 80 PVC, Schedule 40 is lighter and commonly used where extra impact protection is not required. As a rule of thumb, 1/2 in EMT typically carries about 9 #12 conductors, 3/4 in about 16, and 1 in about 26 under standard conduit fill practices; actual fill depends on conductor type, insulation, and code requirements.

Actual performance depends on conductor count, insulation type, bend layout, ambient conditions, and local electrical code.

Specifications

• Product type: Rigid PVC electrical conduit
• Trade size: 1 in
• Schedule: 40
• Length: 10 ft (3.05 m)
• Colour: Grey
• Material: PVC
• Application: Electrical raceway for conductor protection
• Installation method: Solvent-weld fittings and accessories
• Typical standard dimensions for 1 in Schedule 40 PVC conduit: approximately 1.315 in OD and 1.004 in minimum average ID