10 AWG TEW Wire · White Thermoplastic Equipment Wire · Stranded Cut To Length

What this product is for

This 10 AWG stranded white TEW wire is typically used for internal wiring of electrical equipment, control panels, appliances, and similar indoor dry-location applications where flexible single-conductor hook-up wire is required.

Use for

Use for panel wiring, machine wiring, transformer leads, and internal equipment conductors where TEW or TEW/MTW style wire is specified. White insulation is commonly selected where conductor identification matters in the enclosure.

Avoid for

Avoid using this as a substitute for building wire where a different insulation type, wet-location rating, direct burial rating, or cable assembly is required. Do not assume outdoor, conduit, or hazardous-location suitability unless the exact manufacturer datasheet confirms it.

Best for

Best for electricians and panel shops needing a stranded 10 AWG single conductor that is easier to route than solid wire in equipment and control assemblies.

Installed in

Typically installed in control cabinets, industrial equipment, OEM assemblies, and indoor electrical enclosures. Approximate outside diameter seen on comparable 10 AWG TEW products is about 0.18 to 0.19 in (4.6 to 4.8 mm), but actual dimensions vary by manufacturer.

Why this product exists

TEW wire is used where electricians need a 600 V insulated conductor with stranded flexibility for tighter bends and cleaner termination inside equipment. Compared with many building wires, this style is selected more for equipment and panel work than for general branch-circuit pulling.

Compared with similar products

Compared with solid building wire, stranded TEW is typically easier to dress in panels and terminate on equipment. Compared with cable assemblies, it is a single conductor and usually needs to be installed as part of a complete wiring method. As a rule of thumb, 10 AWG copper is commonly associated with 30 A circuits, but actual ampacity depends on insulation type, termination rating, enclosure conditions, and local electrical code.

Actual performance depends on installation conditions, bundling, termination temperature rating, and local electrical code.

Specifications

• Type: TEW wire, commonly also listed as TEW/MTW on comparable products
• Conductor size: 10 AWG
• Conductor: Stranded copper
• Insulation colour: White
• Typical voltage rating on comparable listings: 600 V
• Typical temperature rating on comparable listings: up to 105 deg C
• Application: Indoor equipment wire, panel wire, hook-up wire
• Location: Dry indoor use unless otherwise confirmed by manufacturer
• Approximate overall diameter on comparable products: 0.18 to 0.19 in (4.6 to 4.8 mm)