10 RW90 Copper · 600 V XLPE Insulation · Black Stranded
10 AWG RW90 single-conductor copper building wire in black on a 300 m reel. Typical RW90 listings in Canada are 600 V rated with XLPE insulation for dry or wet locations and 90 deg C conductor temperature, but this SKU should be manually confirmed against the exact manufacturer listing before purchase.
What this product is for
This product is a 10 AWG RW90 single-conductor copper building wire in black, supplied on a 300 m reel. It is commonly used by electricians for branch circuit and feeder wiring in raceways for commercial, industrial, and residential work where RW90 conductors are specified.
Use for
Use for pulling into conduit or raceways in dry or wet locations where Canadian code and the equipment design call for RW90 copper conductors. Black 10 AWG is commonly selected for ungrounded conductors, control runs, and general power wiring depending on circuit design and identification requirements.
Avoid for
Avoid using this as a finished flexible cord, direct-burial cable, or as a substitute for multi-conductor cable where a jacketed cable assembly is required. Do not assume ampacity from the product title alone; final conductor sizing depends on termination temperature ratings, conduit fill, ambient conditions, and local electrical code.
Best for
Best for contractors and maintenance electricians who need a full 300 m reel of 10 AWG RW90 for repeated pulls, panel work, equipment feeds, or longer raceway runs. A full reel can reduce handling time compared with short cut lengths on larger jobs.
Installed in
Typically installed in conduit systems, electrical rooms, service spaces, commercial tenant fit-outs, light industrial facilities, and residential projects where single RW90 conductors are specified. 300 m is approximately 984 ft, which helps when planning larger pulls and material takeoff.
Why this product exists
RW90 wire is used where installers need a single insulated conductor with a higher temperature rating and suitability for raceway wiring in Canadian applications. Typical market listings for 10 AWG RW90 black wire show XLPE insulation, 600 V rating, and use in dry or wet locations.
Compared with similar products
Compared with NMD90 cable, RW90 is a single conductor intended for conduit and raceway systems rather than a finished non-metallic cable assembly. Compared with lower-temperature building wire types, RW90 is commonly chosen where a 90 deg C conductor rating is required. Typical trade guidance: 10 AWG copper is commonly used on 30A circuits, but actual allowable load depends on equipment terminations, installation method, and code. Actual performance depends on installation conditions, insulation, layout, and local electrical code.
Specifications
- SKU: 10RW90B-300
- Product type: RW90 building wire
- Conductor size: 10 AWG
- Conductor material: Copper
- Number of conductors: 1
- Colour: Black
- Length: 300 m (approximately 984 ft)
- Typical insulation type for RW90 listings: XLPE
- Typical voltage rating for RW90 listings: 600 V
- Typical temperature rating for RW90 listings: up to 90 deg C, with some listings showing minimum installation handling to -40 deg C
- Typical applications: raceways in dry or wet locations
- Standards commonly shown on comparable listings: CSA RW90 / C22.2
- Important note: exact brand, strand class, outside diameter, and ampacity for this SKU were not confirmed from a manufacturer page and should be manually verified before listing live
- ColourBlack
- Conductor Size10 AWG
- Conductor MaterialCopper
- Applicationraceways in dry or wet locations
- Length300 m (approximately 984 ft)
- Number Of Conductors1
- SKU10RW90B-300
- Important Noteexact brand, strand class, outside diameter, and ampacity for this SKU were
- BrandsWhite Label
- Stock in Flesherton2
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.