Electronic motor starter AHO selector 32A 208V coil NEMA 4X non-combination non-reversing Eaton ECX09H5EBA

What this product is for

This motor starter is used to start and stop industrial motors in commercial and light industrial control panels and field-mounted equipment. It fits Eaton's XT IEC enclosed starter family and is intended for applications that need an enclosed non-combination starter with a 208V control coil.

Use for

Use for pumps, fans, compressors, conveyors, and similar motor loads where an enclosed starter is required. Typical selection depends on motor voltage, full-load current, enclosure requirement, and the exact overload range matched to the motor nameplate FLA.

Avoid for

Avoid using this as a direct replacement unless the enclosure style, control operator, overload range, and coil voltage all match the existing unit. Do not size from horsepower alone when motor FLA and control voltage are available.

Best for

Best for electricians and maintenance buyers replacing an Eaton XT enclosed starter in washdown or corrosive areas where a non-metallic NEMA 4X enclosure is preferred. It is also suitable where a compact enclosed starter is needed instead of a larger traditional motor starter assembly.

Installed in

Commonly installed in equipment rooms, mechanical spaces, process areas, and outdoor or washdown-adjacent locations, depending on the final enclosure and operator configuration. The enclosure family is commonly used where dust, rain, and hose-directed water resistance are required.

Why this product exists

This product exists to provide enclosed motor starting and overload protection in a compact IEC format. Eaton's ECX non-metallic starter platform combines the contactor, overload relay, and enclosure into one assembly to simplify field selection and replacement.

Compared with similar products

Compared with an open contactor and separate enclosure, this style reduces assembly time and helps standardize motor control installations. Compared with a combination starter, a non-combination starter does not include integral branch-circuit short-circuit protection, so upstream protection must be selected correctly. Actual suitability depends on motor FLA, SCCR requirements, installation conditions, and local electrical code.

Specifications

• Brand: Eaton
• Manufacturer part number: ECX09H5EBA
• Product family: XT IEC electronic motor starters
• Type: Enclosed electronic motor starter
• Starter configuration: Non-combination, non-reversing
• Enclosure: NEMA 4X non-metallic, approximately IP66 family coding
• Coil voltage: 208V AC
• Starter size code: H
• Amperage platform: 32A
• Typical horsepower platform from Eaton ECX09 coding: up to 5 hp single-phase at 208/230V and up to 10 hp three-phase at 208/230V
• Selection note: Eaton ECX starters require the correct overload range matched to motor FLA
• Buying note: Verify operator code and overload suffix, as Eaton catalogue listings commonly use additional suffix characters for the complete assembled starter