Motor Starter · 32A 240V Coil · NEMA 4X Non-Combination Non-Reversing · Eaton ECX09H5BB· N

What this product is for

This enclosed motor starter is used for full-voltage, non-reversing motor control in industrial and light commercial installations. It combines an Eaton XT IEC starter assembly with overload protection inside a non-metallic NEMA 4X enclosure for locations exposed to moisture, dust, or corrosion.

Use for

Use for pumps, fans, compressors, conveyors, and similar motor loads that need an enclosed non-combination starter with a 240V control coil. It is commonly selected where the motor full-load current falls within the 24-32A overload adjustment range and where a compact enclosed starter is preferred.

Avoid for

Avoid for reversing applications, variable speed control, or installations that require branch circuit protection built into the same enclosure. Do not size by horsepower alone; verify motor voltage, phase, full-load amps, and required protection before ordering.

Best for

Best for electricians and maintenance teams needing a factory enclosed Eaton XT starter for wet or dirty environments. This style is a practical choice when you want a non-metallic enclosure and adjustable thermal overload coverage in the 24-32A range.

Installed in

Typically installed in mechanical rooms, process areas, agricultural buildings, washdown zones, and outdoor service areas where a Type 4X/IP66 enclosure is appropriate. Typical enclosure size for this frame is approximately 7.9 x 4.7 x 4.9 in (200 x 120 x 160 mm).

Why this product exists

This product provides straightforward across-the-line motor starting with overload protection in a sealed enclosure, reducing field assembly time. Eaton's ECX non-metallic starter line is intended for applications that need environmental protection without moving to a larger custom control assembly.

Compared with similar products

Compared with an open starter, this unit adds an enclosed NEMA 4X housing for harsher environments. Compared with a combination starter, this is a non-combination design, so branch circuit protection is typically provided separately upstream. Compared with reversing starters, this unit is for non-reversing motor control only.

Specifications

• Manufacturer: Eaton
• Manufacturer part number: ECX09H5BBA-N
• Product family: XT IEC enclosed motor starter, ECX series
• Product type: Electronic motor starter / enclosed motor starter
• Configuration: Non-combination, non-reversing, full voltage
• Coil voltage: 240 V, 60 Hz
• Amperage rating: 32 A
• Overload range: 24-32 A
• Overload relay: XTOB bi-metallic overload relay
• Enclosure rating: NEMA 4X, IP66
• Enclosure material: Non-metallic polycarbonate
• Typical motor rating from Eaton ECX catalogue: up to 5 hp single-phase at 230 V and up to 10 hp three-phase at 230 V
• Approximate enclosure dimensions: 7.9 x 4.7 x 4.9 in (200 x 120 x 160 mm)
• Certifications: CSA Certified, UL Listed
• Buying note: Match the overload setting to the motor nameplate FLA. Continuous motor load selection should follow equipment nameplate data, installation conditions, and local electrical code.