Enclosed IEC motor starter A0C-32A max FLA, 240V coil, NEMA 4X non-metallic, Start-Stop controls A0C Eaton ECX09H5BBA

What this product is for

This enclosed IEC motor starter is used to start and stop motors in industrial and light commercial control panels where an enclosed starter is required. The ECX09 platform is an Eaton XT non-combination non-reversing starter in a non-metallic Type 4X/IP66 enclosure with cover-mounted Start-Stop controls.

Use for

Use for pumps, fans, small machinery, washdown areas, and other motor loads where a 240V AC control coil is required and the installation benefits from a watertight non-metallic enclosure. Typical motor starter selection also depends on motor full-load current, overload setting, supply voltage, and control scheme.

Avoid for

Avoid for reversing applications, combination starter applications with integral disconnect protection, or installations where the exact overload range and suffix are not confirmed. Do not assume this base number alone covers every assembled variant.

Best for

Best for electricians and maintenance teams replacing an Eaton XT enclosed starter in wet or corrosive environments where NEMA 4X/IP66 protection and simple Start-Stop control are required.

Installed in

Installed in manufacturing areas, mechanical rooms, pump skids, agricultural buildings, and outdoor or washdown locations. For Canadian buyers, verify enclosure suitability, branch protection, and overload selection to local code and site conditions.

Why this product exists

This product packages an IEC starter and enclosure into one assembly so contractors can apply motor control in a compact enclosed format instead of building the assembly from separate components. A non-metallic Type 4X enclosure is commonly chosen where moisture, hose-down, or corrosion resistance is a factor.

Compared with similar products

Compared with an open starter, this enclosed version adds environmental protection and operator controls on the cover. Compared with a combination starter, it does not typically include the same integral disconnect or branch protective device arrangement. Compared with a Type 1 enclosure, Type 4X/IP66 is better suited to wet locations.

Specifications

• Brand: Eaton
• Manufacturer part number: ECX09H5BBA
• Series/family: XT IEC enclosed control, Class ECX09
• Product type: Enclosed non-combination non-reversing IEC motor starter
• Enclosure: Type 4X/IP66, non-metallic watertight
• Coil voltage: 240V AC
• Control type: Start-Stop pushbuttons
• Ampere frame code: H = 32A max class size
• Application: Motor starting and stopping
• Trade note: overload selection is tied to the assembled code and motor FLA; confirm the exact overload range before purchase
• Typical guidance: motor starters are commonly selected to match motor full-load current and control voltage, with branch protection sized to the installation. Actual performance depends on motor data, installation conditions, and local electrical code.