Stock 1

Contactor A0B7 150A AC-3 3-Pole 220-240V AC Coil · Non-Reversing XT Series · Eaton XTCE150G00B

SKU: EAT-XTCE150G00B

Eaton XTCE150G00B is a 3-pole non-reversing IEC contactor rated 150A AC-3 with a 190-240V AC 50/60 Hz coil and screw terminals. Commonly used for motor control, HVAC equipment, pumps, and machinery panels where a 220-240V control circuit is available.

What this product is for

This IEC contactor is used to switch 3-phase motors and other power loads in industrial and commercial control panels. It is a non-reversing 3-pole unit in Eaton's XT Series G-frame range with a 190-240V AC coil for 50/60 Hz control circuits.

Use for

Motor starters and machinery control panels
HVAC equipment, pumps, compressors, and fans
Panel-mounted or DIN rail mounted assemblies where a 220-240V AC control voltage is used
Applications requiring 150A AC-3 switching and 190A AC-1 rating

Avoid for

Applications requiring reversing operation without the proper reversing assembly
DC coil control circuits
Installations that need built-in auxiliary contacts when none are supplied on this base unit
Loads above the published current, voltage, or horsepower ratings

Best for

Best for electricians and panel builders specifying a full-voltage non-reversing contactor for larger 3-phase motor loads. It suits OEM panels, replacement work, and commercial or industrial service where Eaton XT components are already in use.

Installed in

Typically installed in motor control centres, industrial enclosures, HVAC control panels, pump panels, and machine cabinets. The body is approximately 90 mm wide and 170 mm high, or about 3.5 in wide and 6.7 in high, so enclosure space and wire bending room should be checked before ordering.

Why this product exists

This contactor provides a standard IEC switching solution for higher-current motor and power circuits using a 220-240V AC control signal. It gives contractors and OEMs a consistent Eaton XT platform for replacement, new panel builds, and coordinated motor control assemblies.

Compared with similar products

Compared with smaller IEC contactors, this G-frame unit handles higher AC-3 motor current at 150A and AC-1 current at 190A. Unlike reversing contactors, this model is a non-reversing 3-pole device. Auxiliary contacts are typically added separately when needed. Actual suitability depends on motor duty, starting method, ambient conditions, and local electrical code.

Specifications

Manufacturer: Eaton
Manufacturer part number: XTCE150G00B
Series: XT Series
Product type: IEC magnetic contactor
Configuration: Non-reversing
Poles: 3
Main contacts: 3NO
Rated operational current AC-3 at 400V: 150A
Rated operational current AC-1 at 400V: 190A
Rated operational power AC-3 at 400V: 75 kW, approximately 100 hp
NEMA power rating: approximately 93 kW, about 125 hp
Coil voltage: 190-240V AC, 50/60 Hz
Operating voltage: 230-690V AC, 50/60 Hz
Connection type: Screw terminals
Mounting: Panel or DIN rail
Frame size: G-frame
Approximate dimensions: 90 mm x 170 mm, about 3.5 in x 6.7 in

- SKU
  EAT-XTCE150G00B
- Manufacturer Part #
  XTCE150G00B
Mounting
Panel or DIN rail
Poles
3
Coil Voltage
190-240V AC, 50/60 Hz
Main Contacts
3NO
Dimensions
90 mm x 170 mm, about 3.5 in x 6.7 in
Series
XT Series
Configuration
Non-reversing
Connection Type
Screw terminals
Frame Size
G-frame
Operating Voltage
230-690V AC, 50/60 Hz
Brands
Eaton
Stock in Elmira
1

Aptico Supply Delivery

Fast Electrical Supply Delivery Across Ontario

Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.

Shop Products Ask About Delivery

Real-Time Inventory

Contractor Delivery Routes

Elmira & Flesherton Pickup

Local Ontario Service

Delivery Built Around Electrical Contractors

Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.

Free Daily Delivery

Free daily delivery is available for larger contractor accounts.

Order by 9:00 AM for morning delivery
Order by 2:00 PM for afternoon delivery
Available in qualifying local delivery areas

Free Weekly Delivery

Free weekly delivery is available for smaller accounts in select service areas.

Elmira area delivery: Tuesday
Flesherton area delivery: Thursday
Order by 11:00 AM on the route day

Pickup Options

Pickup is available from our Ontario locations for customers who prefer to collect their order directly.

Elmira pickup available
Flesherton pickup available
Call ahead for large or special-order items

Local Delivery Areas

See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.

Delivery Questions

Do you offer free delivery?

Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.

Can I pick up my order?

Yes, pickup is available from our Elmira and Flesherton locations.

Do delivery charges apply?

Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.

Can you deliver to jobsites?

Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.

Need Electrical Supplies Delivered?

Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.

Contact Aptico Supply

We accept the following payment methods:

Accepted payment methods

To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.

This page is intended for your policy regarding returns and refunds.

Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.

To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.