Utility Light Fixture · 150W incandescent ceiling mount clear glass globe · Ipex LVPE150-10/15
Ceiling-mount non-metallic utility light fixture rated for 150W incandescent lamps at 120V, supplied with a standard clear glass globe. Commonly used in service rooms, corridors, utility spaces, and damp or wet industrial areas where corrosion resistance and a sealed globe assembly are important.
What this product is for
This is a ceiling-mount non-metallic utility light fixture for 120V circuits using a 150W incandescent lamp and a standard clear glass globe. It is part of the Ipex Sceptalight line and is intended for indoor utility lighting and wet-location style installations where corrosion resistance matters.
Use for
- Utility rooms, service corridors, mechanical spaces, and maintenance areas
- Commercial or industrial indoor locations where a sealed globe fixture is preferred
- Areas exposed to moisture, washdown, or corrosive conditions where non-metallic construction is beneficial
Avoid for
- Applications requiring integrated LED performance or high efficacy
- Hazardous locations unless the exact hazardous-location model is specified
- Projects where lamp replacement access or energy code requirements favour LED retrofit or dedicated LED fixtures
Best for
Best for electricians and maintenance teams needing a traditional lamp-based utility fixture with PVC construction, a clear glass globe, and ceiling mounting. It suits installations where corrosion resistance and serviceability are more important than LED efficiency.
Installed in
Typically installed on ceilings in commercial buildings, industrial facilities, utility spaces, and similar indoor service environments. The fixture is listed with 1/2 in and 3/4 in hubs (approximately 16 mm and 21 mm) for conduit-based wiring methods.
Why this product exists
This fixture provides a non-metallic alternative to metal utility lights in locations where moisture, chemicals, or corrosion can shorten fixture life. The globe-and-gasket style enclosure helps protect internal connections while keeping the fixture field-serviceable with a replaceable lamp.
Compared with similar products
Compared with polycarbonate-globe versions, this model uses a standard clear glass globe. Compared with newer LED versions in the same family, this incandescent model is simpler for lamp replacement but typically uses more energy and requires more frequent relamping. If lower maintenance is the priority, an LED retrofit or LED version is commonly preferred.
Typical guidance only: legacy 150W incandescent utility fixtures are often selected where existing lamp stock, simple controls, or straightforward replacement are priorities. Actual performance depends on lamp selection, mounting height, dirt buildup, and site conditions.
Specifications
- Brand: Ipex
- Series: Sceptalight
- Manufacturer part number: LVPE150-10/15
- Product type: Ceiling-mount utility light fixture
- Lamp type: Incandescent
- Maximum lamp wattage: 150W
- Voltage rating: 120V AC
- Mounting: Ceiling mount
- Globe: Standard clear glass globe
- Construction: PVC non-metallic body
- Hub sizes: 2 x 1/2 in and 2 x 3/4 in (approximately 16 mm and 21 mm)
- Application: Indoor utility lighting; wet-location style non-metallic fixture family
- Standards referenced by listings/catalog sources: CSA and UL utility light fixture standards
- ApplicationIndoor utility lighting; wet-location style non-metallic fixture family
- Voltage120V AC
- SeriesSceptalight
- MountingCeiling mount
- ConstructionPVC non-metallic body
- Lamp TypeIncandescent
- Hub Sizes2 x 1/2 in and 2 x 3/4 in (approximately 16 mm and 21 mm)
- BrandsIpex
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.