:
from
to
Clear
Clear
Fiberglass wall-mount enclosure · 16.27 x 14.40 x 8.13 in · NEMA 4X IP66 snap-latch hinged cover · Hammond Manufacturing PJ16148L
SKU: HAM-PJ16148L
Non-metallic PJ Series wall-mount enclosure with a molded fiberglass polyester body, continuous hinge, and snap-latch cover for wet, corrosive, and outdoor installations. Sized 16.27 x 14.40 x 8.13 in (413 x 366 x 207 mm), with NEMA 4X and IP66 protection for control, junction, and terminal wiring applications.
What this product is for
This wall-mount non-metallic enclosure is used to protect controls, terminals, and junction wiring in outdoor, washdown, and corrosive locations. The fiberglass polyester body helps where a metal enclosure may be less suitable due to moisture, chemicals, or corrosion exposure.
Use for
- Electrical junction and terminal wiring enclosures
- Instrument enclosures
- Electric, hydraulic, or pneumatic control housings
- Outdoor industrial and commercial installations
- Wet or hose-down areas requiring NEMA 4X and IP66 protection
Avoid for
- Applications requiring a metallic enclosure for bonding or shielding
- Installations where enclosure size must be confirmed around large internal components without checking panel and depth clearance
- Hazardous location applications unless the full assembly is separately approved for that use
Best for
Electricians and panel builders needing a corrosion-resistant wall-mount enclosure with a hinged cover, snap latches, and gasketed seal for outdoor service, wastewater, agriculture, food-related washdown areas, and general industrial control packaging.
Installed in
Typically installed on walls, structural frames, service areas, process equipment, and exterior mounting surfaces in commercial and industrial facilities. Commonly used where rain, spray, washdown, or corrosive conditions are present.
Why this product exists
This enclosure provides a non-metallic alternative to painted steel for applications where corrosion resistance, weather resistance, and electrical insulation are important. The continuous hinge, snap-latch closure, and oil-resistant gasket help maintain the enclosure seal in demanding environments.
Compared with similar products
Compared with painted steel enclosures, this fiberglass polyester design is better suited to corrosive and wet locations. Compared with smaller junction boxes, the 16.27 x 14.40 x 8.13 in size gives more room for controls, terminals, and wiring management. This PJ16148L version uses a snap-latch hinged cover; buyers needing a different latch style should confirm other PJ Series variants before ordering.
Specifications
- Manufacturer: Hammond Manufacturing
- Part number: PJ16148L
- Series: PJ Series
- Product type: Non-metallic wall-mount enclosure
- Material: Molded fiberglass polyester
- Colour: Light gray
- External size: 16.27 x 14.40 x 8.13 in (413 x 366 x 207 mm)
- Optional inner panel size: 14.75 x 12.88 in (375 x 327 mm), panel part 14R1513
- Mounting: Wall mount
- Cover: Continuous hinged cover
- Latch: Stainless steel snap latch with provision for padlocking
- Gasket: Captive oil-resistant gasket
- Ratings: NEMA 4X, IP66
- Also listed by distributor sources as NEMA 3R/4X/13 and UL/CSA Type 1, 2, 3, 4, 4X, 12, 13
- Temperature rating: -40 to 130 deg C (-40 to 266 deg F)
- Shipping weight: 14 lb (6.35 kg)
- Compliance: RoHS and REACH compliant
- MaterialMolded fiberglass polyester
- MountingWall mount
- ColourLight gray
- ComplianceRoHS and REACH compliant
- SeriesPJ Series
- CoverContinuous hinged cover
- External Size16.27 x 14.40 x 8.13 in (413 x 366 x 207 mm)
- Shipping Weight14 lb (6.35 kg)
- GasketCaptive oil-resistant gasket
- LatchStainless steel snap latch with provision for padlocking
- RatingsNEMA 4X, IP66
- Temperature Rating-40 to 130 deg C (-40 to 266 deg F)
- Specification NotesAlso listed by distributor sources as NEMA 3R/4X/13 and UL/CSA Type 1, 2, 3
- BrandsHammond Manufacturing
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.
