Rigid Conduit Nipple · 2-1/2 in x 6 in - Threaded Steel - 2.5X6RIGID
2-1/2 in x 6 in rigid conduit nipple for joining threaded rigid or IMC conduit to boxes and enclosures. Common listings for this size indicate galvanized steel construction with male threads on both ends; verify certification and exact finish before ordering.
What this product is for
This rigid conduit nipple is used to make a short threaded connection between enclosures, pull boxes, cabinets, or threaded rigid and IMC raceway components. The 2-1/2 in x 6 in size is typically selected where a fixed short offset is needed and a factory-threaded steel nipple is preferred over cutting and threading conduit on site.
Use for
Use for threaded rigid metal conduit (RMC) or IMC installations in commercial and industrial work, service equipment, panel connections, and other raceway transitions where a short threaded section is required. Typical distributor listings for this size show steel construction, galvanized finish, and male threads on both ends.
Avoid for
Avoid using this item where EMT fittings are required, where a non-metallic raceway system is specified, or where corrosive environments call for stainless steel, PVC-coated, or other specialty materials. Do not assume hazardous location suitability unless the exact listing confirms it.
Best for
Best for electricians and contractors who need a ready-made 6 in (152 mm) threaded nipple in a 2-1/2 in trade size for rigid conduit layouts. It helps save field labour compared with cutting and threading short conduit pieces on site.
Installed in
Installed in electrical rooms, commercial buildings, industrial facilities, service entrances, equipment connections, and large box or enclosure penetrations using compatible threaded hubs, locknuts, and bushings as required by the installation method and local code.
Why this product exists
This product provides a short, factory-threaded raceway section for secure mechanical continuity between threaded components. For short raceway links, a pre-made nipple can reduce installation time and help maintain consistent thread quality.
Compared with similar products
Compared with field-cut rigid conduit, a factory nipple is faster to install for short runs. Compared with EMT nipples, this style is intended for threaded rigid or IMC systems. Compared with close nipples, the 6 in length gives more spacing between enclosures or fittings. Always match trade size, thread type, finish, and certification to the job requirements.
Specifications
- Product type: Rigid conduit nipple
- Trade size: 2-1/2 in
- Length: 6 in (152 mm)
- Connection type: Male threaded both ends
- Material: Typically steel
- Finish: Typically galvanized
- Compatible raceway: Rigid metal conduit (RMC) and IMC, where approved
- Application: Short threaded connection between boxes, enclosures, and threaded conduit components
- Buying note: Source listings for comparable products show steel galvanized construction, but manufacturer brand and certification for SKU 2.5X6RIGID were not clearly confirmed from the available results
- ApplicationShort threaded connection between boxes, enclosures, and threaded conduit components
- Materialtypically steel
- Trade Size2-1/2 in
- Connection TypeMale threaded both ends
- FinishTypically galvanized
- Buying NoteSource listings for comparable products show steel galvanized construction, but manufacturer brand and certification for SKU 2.5X6RIGID were not clearly confirmed from the available results
- Length6 in (152 mm)
- BrandsWhite Label
- Stock in Elmira1
- Stock in Flesherton3
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.