- Stock 14
:
from
to
Clear
Clear
Rigid Conduit Nipple · 2 in x 3 in - Threaded Steel for Rigid/IMC - 2X3RIGID
SKU: CF-2X3RIGID
2 in x 3 in threaded rigid conduit nipple for joining threaded rigid or IMC conduit and fittings in panel, enclosure, and box connections. Common market listings show galvanized steel construction for this size; verify finish and listing before ordering if your job requires a specific brand or certification.
What this product is for
This 2 in x 3 in rigid conduit nipple is used to make short threaded connections between enclosures, boxes, hubs, and threaded rigid or IMC raceway components. It is typically selected where a short factory-threaded section is faster and cleaner than cutting and threading conduit on site.
Use for
Use for short raceway offsets between cabinets, pull boxes, wireways, meter bases, and other threaded entries that accept rigid or IMC fittings. Commonly used with locknuts, bushings, and threaded hubs where a compact bonded metal raceway connection is required.
Avoid for
Avoid using this as a substitute for EMT fittings, PVC adapters, or non-threaded raceway systems unless the full assembly is listed for that transition. Do not assume corrosion resistance, environmental rating, or certification without confirming the actual manufacturer and product listing.
Best for
Best for electricians and contractors needing a short threaded steel nipple in a 2 in trade size for rigid conduit work in commercial, industrial, and service equipment installations.
Installed in
Typically installed in electrical rooms, service entrances, mechanical rooms, commercial tenant fit-ups, industrial spaces, and outdoor equipment when paired with the correct listed fittings and sealing method for the environment.
Why this product exists
It provides a ready-made short threaded section that reduces field threading time and helps create a compact connection between threaded components. This is especially useful where space is limited between adjacent enclosures or where a short rigid bonding path is needed.
Compared with similar products
Compared with full lengths of rigid conduit, a nipple is intended for short connection distances only. Compared with EMT connectors or couplings, this product is for threaded rigid/IMC systems. Typical trade practice is to match the nipple type to the raceway system and fitting thread type for a proper listed assembly.
Rule of thumb: short nipples are commonly used where equipment spacing is tight and a full conduit run is unnecessary. Actual suitability depends on the enclosure, fitting type, bonding method, and local electrical code.
Specifications
- Product type: Rigid conduit nipple
- Trade size: 2 in
- Length: 3 in (approximately 76 mm)
- Connection type: Male threaded ends
- System compatibility: Typically rigid metal conduit (RMC) and IMC threaded fittings
- Material: Common market listings indicate steel, often galvanized
- Application: Short threaded connection between boxes, enclosures, hubs, and conduit components
- Brand: Generic or unconfirmed from source row
- Part number: 2X3RIGID
- ApplicationShort threaded connection between boxes, enclosures, hubs, and conduit components
- MaterialCommon market listings indicate steel, often galvanized
- Trade Size2 in
- Connection TypeMale threaded ends
- Length3 in (approximately 76 mm)
- System CompatibilityTypically rigid metal conduit (RMC) and IMC threaded fittings
- BrandsWhite Label
- Stock in Elmira2
- Stock in Flesherton16
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.