Main Breaker Panel · 200A - 20/40 Circuits Indoor · Eaton CBRPM220

What this product is for

This 200A single-phase main breaker loadcentre is used to distribute 120/240V power in residential and light commercial installations. It combines a factory-installed main breaker with a 20-space, 40-circuit interior for branch circuit distribution.

Use for

Use for indoor service entrance applications, panel replacements, renovations, and new construction where a 200A main breaker panel is required. It suits flush or surface mounting and accepts Eaton BR plug-on neutral branch breakers.

Avoid for

Avoid for outdoor locations, corrosive environments, or installations requiring a weatherproof enclosure. Do not use where a larger circuit count, three-phase distribution, or a main lug only configuration is required.

Best for

Best for houses, secondary suites, and small light commercial spaces that need a 200A indoor loadcentre with room for up to 40 circuits. Typical guidance: 200A service is commonly used for larger homes, all-electric homes, and projects with added loads such as EV charging or electric heat, but actual load calculations must follow local code and site conditions.

Installed in

Installed indoors in utility rooms, basements, service rooms, garages, and similar dry locations. The enclosure is Type 1 steel for indoor use and can be mounted flush or surface.

Why this product exists

This model gives electricians a Canadian-spec Eaton BR loadcentre with a factory-installed 200A main breaker and plug-on neutral design to streamline branch breaker installation and service entrance distribution.

Compared with similar products

Compared with smaller 100A or 125A panels, this 200A model supports higher service capacity and larger feeder conductors. Compared with higher circuit-count panels, this 20-space, 40-circuit format is a fit where wall space is limited but tandem circuit capacity may still be needed. Actual circuit planning depends on breaker selection, load balancing, and local electrical code.

Specifications

• Brand: Eaton
• Manufacturer part number: CBRPM220
• Product type: Main breaker loadcentre
• Series: BR
• Neutral type: Plug-on neutral
• Application: Canadian PON loadcentre
• Amperage: 200A
• Voltage: 120/240 VAC
• Phase: Single-phase, 3-wire
• Spaces: 20
• Maximum circuits: 40
• Mounting: Flush or surface
• Enclosure type: Type 1 indoor
• Construction: Steel, white finish
• Main conductor range: #2 to 300 MCM copper/aluminium
• Dimensions: 29-1/8 in H x 14-3/8 in W x 3-7/8 in D (approximately 740 x 365 x 98 mm)
• Certifications: CSA Certified, UL 50, UL 67
• Product weight: approximately 46 lb (20.9 kg)

Estimated buying guidance only: panel sizing and circuit count should be confirmed by load calculation, equipment schedule, and local electrical code. Actual suitability depends on service demand, connected loads, and installation conditions.