- Stock 24
:
from
to
Clear
Clear
Straight Blade Connector · 20A 125V NEMA 5-20R AutoGrip - Eaton 5369N
SKU: CWD-5369N
Industrial grade straight blade cord connector rated 20A, 125V with NEMA 5-20R configuration for 2-pole, 3-wire grounding applications. AutoGrip back-wire design accepts #16-12 AWG conductors and is commonly used on portable equipment cords, extension cords, and shop power connections.
What this product is for
This straight blade cord connector is used to terminate a 20A, 125V cord end where a NEMA 5-20R female connection is required. It is suited to industrial and commercial cord sets, portable tools, temporary power leads, and workshop equipment.
Use for
- 20A, 125V cord-end connections
- NEMA 5-20R 2-pole, 3-wire grounding applications
- Portable equipment cords and extension cord repairs
- Shop, plant, maintenance, and contractor power connections
Avoid for
- Locking device applications that require twist-lock configuration
- Circuits above 125V or above 20A
- Wire outside the listed #16-12 AWG range
- Applications requiring a male plug rather than a female connector body
Best for
Best for electricians and maintenance teams needing a field-wireable 5-20R connector with industrial specification grade construction and back-wire termination. The AutoGrip style is intended to speed cord-end assembly compared with more basic straight blade connector bodies.
Installed in
Typically installed on flexible cords serving portable tools, test equipment, extension leads, bench equipment, and temporary power distribution in commercial and light industrial environments.
Why this product exists
This connector provides a serviceable cord-end termination for 20A branch-circuit equipment where a grounded 125V straight blade connection is needed. For trade use, 20A cord connectors are commonly paired with circuits using #12 AWG conductors, but actual cord and overcurrent protection requirements depend on equipment design, installation conditions, and local electrical code.
Compared with similar products
Compared with standard straight blade connector bodies, this model is identified by Eaton as an AutoGrip industrial grade connector with back-wire termination. It is a straight blade 5-20R connector, so it is not interchangeable with locking devices or with 15A-only NEMA 5-15 configurations where a 20A T-slot pattern is not required.
Specifications
- Manufacturer part number: 5369N
- Brand: Eaton Arrow Hart
- Product type: Straight blade connector
- Device type: Connector body
- Amperage: 20A
- Voltage: 125V
- NEMA configuration: 5-20R
- Poles/wires: 2-pole, 3-wire grounding
- Wiring method: Back wire
- Connection type: Screw
- Allowable wire size: #16-12 AWG
- Contact material: Brass
- Body material: Nylon
- Style: Straight body, straight blade
- Device grade: Extra heavy-duty industrial specification grade
- Colour: Black/white
- Dimensions: 4.25 in L x 2 in W x 1.75 in H (approximately 108 x 51 x 44 mm)
- Weight: 0.209 lb (approximately 0.095 kg)
- Certification: cULus Listed
- UPC: 040893018256
- Contact MaterialBrass
- ColourBlack/white
- ApprovalscULus Listed
- Upc40893018256
- Connection TypeScrew
- Body MaterialNylon
- Dimensions4.25 in L x 2 in W x 1.75 in H (approximately 108 x 51 x 44 mm)
- Voltage125V
- Current Rating20A
- NEMA Configuration5-20R
- Device TypeConnector body
- Wiring MethodBack wire
- Allowable Wire Size#16-12 AWG
- Device GradeExtra heavy-duty industrial specification grade
- Poles Wires2-pole, 3-wire grounding
- Weight0.209 lb (approximately 0.095 kg)
- StyleStraight body, straight blade
- BrandsCooper Wiring Devices
- Stock in Elmira1
- Stock in Flesherton2
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.