GFCI duplex receptacle · 20A 125V · tamper resistant self-test ivory · Eaton TRSGF20V
20A, 125V tamper-resistant self-test GFCI duplex receptacle in ivory with back and side wiring for #14 to #10 AWG conductors. Commonly used on 20A branch circuits with a NEMA 5-20R face where GFCI protection is required; actual application must follow local electrical code.
What this product is for
This is a 20A, 125V tamper-resistant self-test GFCI duplex receptacle for branch circuits that require personnel ground-fault protection. It is suitable for residential and commercial installations and uses a NEMA 5-20R face in an ivory finish.
Use for
Use for kitchens, bathrooms, garages, basements, utility areas, service counters, and other locations where a GFCI receptacle is specified. It accepts #14 to #10 AWG copper or copper-clad conductors and supports back or side wiring.
Avoid for
Avoid using this device where weather resistance, hospital grade, isolated ground, or locking configuration is required unless the project specification calls for those features. Do not use a 20A face configuration unless it matches the circuit design and connected equipment requirements.
Best for
Best for electricians replacing or specifying a 20A GFCI receptacle with tamper resistance and automatic self-test in standard wall box installations. It is a practical choice when a visible 5-20R configuration is needed for commercial or dedicated 20A receptacle layouts.
Installed in
Installed in flush wall boxes in residential, institutional, and light commercial spaces. Typical 20A branch circuits are commonly paired with #12 AWG conductors as a rule of thumb; verify conductor size, breaker size, and code requirements before installation.
Why this product exists
This receptacle provides local GFCI protection while adding tamper-resistant shutters and self-test functionality. It is intended to help meet modern safety requirements without moving to a breaker-based GFCI solution.
Compared with similar products
Compared with a 15A GFCI receptacle, this model has a 20A, 125V NEMA 5-20R configuration for equipment with a 20A plug pattern. Compared with slim GFCI models, this listing aligns to the standard TRSGF20V catalog number rather than Eaton's slim TRGF20V series.
Specifications
- Manufacturer part number: TRSGF20V
- Brand: Eaton
- Legacy brand reference: Cooper Wiring Devices
- Product type: GFCI duplex receptacle
- Current rating: 20A
- Voltage rating: 125V AC
- Configuration: NEMA 5-20R
- Pole/wire: 2-pole, 3-wire grounding
- Protection type: GFCI, self-test
- Safety feature: Tamper resistant
- Wiring method: Back and side wire
- Wire range: #14 to #10 AWG
- Mounting style: Flush
- Colour: Ivory
- Material: Polycarbonate body with brass contacts listed by source pages
- Typical device size: approximately 4.19 in H x 1.69 in W (106 x 43 mm) based on distributor listing
Typical guidance only: 20A receptacle circuits are commonly wired with #12 AWG conductors. Actual performance and code compliance depend on circuit design, installation conditions, and local electrical code.
- MaterialPolycarbonate body with brass contacts listed by source pages
- Voltage125V AC
- MountingFlush
- ColourIvory
- ConfigurationNEMA 5-20R
- Wiring MethodBack and side wire
- Legacy Brand ReferenceCooper Wiring Devices
- Current Rating20A
- Wire Range#14 to #10 AWG
- Pole Wire2-pole, 3-wire grounding
- Protection TypeGFCI, self-test
- Safety FeatureTamper resistant
- BrandsCooper Wiring Devices
- Stock in Elmira2
- Stock in Flesherton2
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.