- Stock 82
:
from
to
Clear
Clear
Connector · 1/2 in LFMC 45 deg - Malleable Iron - Nesco 231S
SKU: NES-231S
1/2 in liquidtight flexible metal conduit connector with a 45 deg body for angled terminations into threaded hubs or enclosures. Malleable iron construction is commonly used where a compact, secure LFMC connection is needed in commercial and industrial installations.
What this product is for
This 1/2 in liquidtight flexible metal conduit connector is used to terminate LFMC into a threaded entry at a 45 deg angle. It helps route conduit into panels, boxes, and equipment where a straight connector would create a tighter bend or awkward approach.
Use for
Use for 1/2 in trade size LFMC connections in commercial, industrial, and OEM equipment wiring. Common applications include motor connections, machinery, HVAC equipment, and outdoor or damp-location runs where listed liquidtight fittings are required.
Avoid for
Avoid using this fitting with conduit types it is not listed for, or where a straight or 90 deg fitting would provide better alignment and less strain on the conduit. Always match the fitting to the conduit type, hub thread, and installation environment.
Best for
Best for angled LFMC terminations where space is limited and a 45 deg entry improves cable routing. This style is commonly chosen to reduce sharp bends at equipment knockouts and threaded hubs.
Installed in
Typically installed in control panels, disconnects, junction boxes, motor housings, rooftop equipment, and industrial machinery. Suitable where 1/2 in trade size liquidtight flexible metal conduit is being brought into threaded equipment entries.
Why this product exists
A 45 deg liquidtight connector gives installers a practical middle angle between straight and 90 deg fittings. It can improve conduit alignment, reduce stress at the termination point, and help maintain a cleaner equipment entry.
Compared with similar products
Compared with a straight LFMC connector, a 45 deg body can simplify routing where the conduit approaches from the side. Compared with a 90 deg connector, it allows a less abrupt change in direction. Typical fitting selection depends on enclosure layout, conduit bend radius, and available working space.
Typical guidance only: choosing the correct angle can reduce strain on the conduit and make pull paths easier, but actual fit depends on equipment spacing and field layout.
Specifications
- Product type: Liquidtight flexible metal conduit connector
- Trade size: 1/2 in
- Metric equivalent: approximately 16 mm trade size
- Angle: 45 deg
- Material: Malleable iron or iron body, based on distributor and catalogue references
- Application: For LFMC terminations
- Connection style: Compression to threaded male hub, typical for this fitting class
- Category: Conduit connector
- Brand: Nesco
- Manufacturer part number: 231S
Actual suitability depends on conduit type, enclosure entry, installation conditions, and local electrical code.
- ApplicationFor LFMC terminations
- MaterialMalleable iron or iron body, based on distributor and catalogue references
- Trade Size1/2 in
- Metric Equivalentapproximately 16 mm trade size
- Angle45 deg
- Connection StyleCompression to threaded male hub, typical for this fitting class
- CategoryConduit connector
- BrandsNesco
- Stock in Elmira13
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.