Masonry Drill Bit · 3/16 in x 6 in · Carbide Tip for Concrete and Masonry · Simpson Strong-Tie MDB53255
3/16 in x 6 in masonry drill bit for drilling concrete, brick, and block. Carbide-tipped design suits anchor and general masonry drilling where a small-diameter bit is required.
What this product is for
This masonry drill bit is used to drill small-diameter holes in concrete, brick, block, and similar masonry materials. The 3/16 in diameter is commonly selected for light anchor work and general fastening preparation.
Use for
Use for rotary hammer or hammer-drill masonry drilling where a 3/16 in bit is specified. Suitable for concrete and masonry fastening work, repair work, and anchor installation.
Avoid for
Avoid using this bit for wood, sheet metal, or precision metal drilling. Do not rely on it where an SDS-plus shank or a specific anchor-system bit is required unless the tool and shank style are confirmed before purchase.
Best for
Best for contractors and installers who need a small masonry bit for concrete and brick drilling. A 6 in overall length gives added reach compared with shorter bits while remaining manageable for routine site work.
Installed in
Used in concrete walls, brick veneer, CMU block, slabs, and other masonry substrates during fastening and retrofit work.
Why this product exists
This bit provides the correct cutting geometry for masonry drilling, where standard twist bits are not suitable. Carbide-tipped masonry bits are commonly used to improve wear resistance in abrasive base materials.
Compared with similar products
Compared with shorter 3/16 in masonry bits, a 6 in length can help when drilling through thicker material or when extra reach is needed. Compared with larger diameters such as 1/4 in, a 3/16 in bit is typically chosen for smaller anchors and lighter fastening points. Actual anchor compatibility depends on the fastener manufacturer's installation requirements.
Specifications
- Product type: Masonry drill bit
- Brand: Simpson Strong-Tie
- Manufacturer part number: MDB53255
- Bit diameter: 3/16 in (approximately 4.8 mm)
- Overall length: 6 in (approximately 152 mm)
- Tip style: Carbide tip
- Application: Concrete, brick, block, and masonry drilling
- Trade note: Small-diameter masonry bits are commonly used for anchor pilot holes; always match bit size to the fastener manufacturer's published requirement.
- ApplicationConcrete, brick, block, and masonry drilling
- Bit Diameter3/16 in (approximately 4.8 mm)
- Tip StyleCarbide tip
- Overall Length6 in (approximately 152 mm)
- Trade NoteSmall-diameter masonry bits are commonly used for anchor pilot holes; alway
- BrandsSimpson/Strong-Tie
- Stock in Flesherton1
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.