Regenerative blower 3.7 kW 229 CFM 108 in. WC max pressure oil-free single-stage Air Power Products Limited DG600-26
Single-stage regenerative blower for pressure or vacuum duty in industrial air handling systems. Rated 3.7 kW with up to 229 CFM and 108 in. WC maximum pressure at 60 Hz, with oil-free operation and cast aluminium construction for contaminant-free air supply.
What this product is for
The DG600-26 is a single-stage regenerative blower used where you need continuous air flow at relatively low pressure or vacuum. It is commonly selected for pneumatic conveying, dust and smoke collection, vacuum systems, aeration, packaging machinery, and process air movement in industrial facilities.
Use for
Use for clean, oil-free air applications that need up to 229 CFM at 60 Hz, up to 108 in. WC maximum pressure, and up to 112 in. WC maximum vacuum. It can be mounted horizontally or vertically as specified by the manufacturer, and includes inlet and outlet silencers for quieter operation.
Avoid for
Avoid using this blower where compressed air at high pressure is required, where explosive or highly corrosive atmospheres are present unless the full installation is engineered for that environment, or where liquid carryover and heavy particulate contamination can enter the compression chamber.
Best for
Best for industrial users who need maintenance-light, pulsation-free air flow from a compact blower with an integral motor and impeller housing. This style is commonly used when oil-free air and simpler installation matter more than high-pressure compressor performance.
Installed in
Typically installed in manufacturing plants, workshops, wastewater and aquaculture systems, printing operations, packaging lines, and material handling systems across Canada. Typical conduit, overload protection, disconnect, and branch circuit selection should be confirmed by the installing electrician and local code requirements.
Why this product exists
This blower fills the gap between a fan and a compressor by producing higher pressure than a standard fan while maintaining continuous flow. The oil-free chamber helps protect product quality in air handling applications, and the cast aluminium housing helps reduce weight while resisting rust in demanding environments.
Compared with similar products
Compared with general-purpose fans, a regenerative blower provides higher static pressure and vacuum capability. Compared with positive displacement compressors, it is better suited to lower-pressure continuous-duty air movement. As a rule of thumb, this type of blower is commonly chosen for conveying, agitation, and vacuum pickup rather than for plant compressed air. Actual performance depends on system resistance, piping layout, altitude, and installation conditions.
Specifications
Manufacturer: Air Power Products Limited
Manufacturer part number: DG600-26
Product type: Single-stage regenerative blower
Power: 3.7 kW
Motor output: approximately 5 hp
Phase: 3-phase
Frequency: 50/60 Hz
Voltage: 220-275/380-480 V at 50 Hz; 200-240/345-415 V at 60 Hz
Maximum current: 13.5/7.8 A
Maximum pressure: 108 in. WC (approximately 2690 mm WC)
Maximum vacuum: 112 in. WC (approximately 2845 mm WC)
Maximum flow: 229 CFM (approximately 389 m3/h)
Weight: 74.8 lb (approximately 33.9 kg)
Noise level: 77 dBA
Construction: Cast aluminium
Air path: Oil-free compression chamber
Motor enclosure: TEFC, IP54 or IP55 depending on application context stated by manufacturer
Protection: Winding-embedded thermistors for overload protection
Mounting: Horizontal or vertical, impeller down only for vertical mounting
Compliance: ULc registered for service in Canada and USA; stated compliance with National Electrical Code and Canadian Electrical Code
Warranty: 1 year
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.