Liquidtight Non-Metallic Conduit · 3/8 inch light grey 100 ft coil · Nesco 15004

What this product is for

This 3/8 in liquidtight flexible non-metallic conduit is used to protect insulated conductors where moisture, dust, or movement make rigid raceway less practical. It is commonly selected for equipment connections, control wiring, and outdoor or damp-location runs when paired with compatible liquidtight fittings.

Use for

Use for short flexible connections to motors, HVAC equipment, pumps, controls, and other equipment where vibration or movement is present. It is also commonly used where a non-metallic liquidtight raceway is preferred in wet or dusty areas.

Avoid for

Avoid using this conduit where severe physical damage is expected, where a metallic raceway is required, or where the installation method and fittings are not approved by local code. Always match the conduit with listed fittings and follow Canadian Electrical Code requirements.

Best for

Best for electricians needing a flexible 3/8 in raceway for damp or outdoor equipment connections without using rigid conduit. This size is typically chosen for smaller conductor bundles and control wiring rather than larger branch circuit pulls.

Installed in

Installed in commercial, industrial, and light equipment applications, including mechanical rooms, rooftop equipment areas, service spaces, and other locations exposed to moisture or dust. A 100 ft coil is practical for field-cut lengths on service and maintenance work.

Why this product exists

Liquidtight flexible non-metallic conduit provides a sealed flexible raceway where standard non-flexible conduit would be slower to install or less suitable around vibrating equipment. It helps protect wiring while allowing easier routing around equipment and tight spaces.

Compared with similar products

Compared with metallic liquidtight conduit, this non-metallic type is lighter and commonly chosen where corrosion resistance and flexibility are priorities. Compared with larger trade sizes, 3/8 in is better suited to smaller conductor counts. As a rule of thumb, conduit fill should be planned conservatively and actual capacity depends on conductor type, insulation, and local code.

Actual performance depends on installation conditions, conductor size, fill, bend layout, fittings, and local electrical code.

Specifications

• Brand: Nesco
• Manufacturer part number: 15004
• Product type: Liquidtight flexible non-metallic conduit
• Trade size: 3/8 in
• Approximate metric trade reference: 12 mm
• Coil length: 100 ft (30.5 m)
• Colour: Grey
• Material: Non-metallic PVC-type construction
• Category: Conduit and cable management
• Typical application: Wet, dusty, outdoor, and equipment connection runs with compatible liquidtight fittings