- Stock 14
:
from
to
Clear
Clear
Manual Motor Controller Switch · 30A 600V 3-Pole NEMA 1 - Eaton AH7810GD-C
SKU: EAT-AH7810GD-C
30A, 600V AC manual motor controller switch with 3-pole, single-throw maintained contact design for 3-phase motor isolation and control. Eaton AH7810GD-C is typically used where a compact wall-mounted manual controller is needed in commercial or industrial installations.
What this product is for
The Eaton AH7810GD-C is a manual motor controller switch for 3-phase motor circuits rated 30A and 600V AC. It is used for local manual switching, motor disconnect, and equipment control where a maintained two-position toggle device is suitable.
Use for
Use for commercial and industrial motor control points, machinery disconnect locations, and equipment requiring a 3-pole manual controller. It is commonly selected for wall-mounted applications with front wire screw and clamp terminations.
Avoid for
Avoid where automatic motor starting, overload protection, or remote control is required unless additional properly rated control and protection components are provided. Confirm suitability with the motor load, short-circuit rating, and local electrical code.
Best for
Best for electricians and maintenance teams needing a compact 30A manual controller for 3-phase equipment at up to 600V AC. This style is typically chosen when simple on-off control and visible toggle operation are preferred.
Installed in
Typically installed in commercial buildings, light industrial facilities, service rooms, and equipment areas. The enclosure style is listed as NEMA 1, which is generally intended for indoor locations.
Why this product exists
This product provides a straightforward manual means of switching and isolating a motor circuit without the complexity of a full starter assembly. It helps where operators need local control at the equipment.
Compared with similar products
Compared with automatic starters or contactors, this manual motor controller is simpler and suited to direct operator control. Compared with heavier disconnect solutions, it offers a compact device format for appropriate motor control applications. Actual application suitability depends on motor characteristics, protection method, installation conditions, and local code.
Specifications
- Brand: Eaton
- Manufacturer part number: AH7810GD-C
- Product type: Manual motor controller switch
- Current rating: 30A
- Voltage rating: 600V AC
- Poles: 3-pole
- Phase: 3-phase
- Contact type: Single-throw, maintained contact, two-position
- Wiring: Front wired screw and clamp
- Mounting: Wall mount
- Enclosure type: NEMA 1
- Terminal wire range: #14 to #10 AWG
- Approximate dimensions from distributor listing: 4-3/4 in x 3 in x 3-1/4 in (about 121 x 76 x 83 mm)
- Voltage600V AC
- MountingWall mount
- Current Rating30A
- Poles3-pole
- Phase3-phase
- WiringFront wired screw and clamp
- Enclosure TypeNEMA 1
- Contact TypeSingle-throw, maintained contact, two-position
- Approximate Dimensions From Distributor Listing4-3/4 in x 3 in x 3-1/4 in (about 121 x 76 x 83 mm)
- Terminal Wire Range#14 to #10 AWG
- BrandsEaton
- Stock in Elmira1
- Stock in Flesherton1
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.
Related products
- Stock 10
Bridgeport Fittings MPN: 3/4EMT90PTA Pull Elbow Emt to Box · 3/4 Inch EMT or Rigid 90 Degree Pull Elbow · 3/4EMT90PTA
- Stock 132
