Stock 1

Manual motor controller · 40A 2-pole 600 VAC maintained contact · Eaton Arrow Hart AHMC240C

SKU: CWD-AHMC240C

40A 2-pole manual motor controller rated 600 VAC for single-phase industrial motor control and disconnect applications. Open-style panel-mount design with maintained toggle action, side wire screw and clamp termination, and compact body for control panels and equipment assemblies.

What this product is for

The AHMC240C is a manual motor controller for switching and isolating single-phase motor loads in industrial and commercial equipment. It is commonly used where a maintained ON/OFF toggle and compact panel-mounted control are required.

Use for

Use for machine panels, equipment skids, OEM assemblies, and motor control points requiring a 40A, 2-pole, 600 VAC manual controller. Suitable where side wiring, open mounting, and clear toggle indication are preferred.

Avoid for

Avoid where a sealed enclosure, washdown rating, or enclosed disconnect is required. Do not use as a substitute for overload protection or where the installation requires a different controller type, enclosure rating, or short-circuit coordination than specified by the equipment design and local code.

Best for

Best for electricians and panel builders needing a compact industrial manual motor controller with maintained 2-position operation, 2-pole switching, and 600 VAC rating in an open panel-mounted format.

Installed in

Typically installed in control panels, machinery, manufacturing equipment, service compartments, and industrial assemblies. Body size is approximately 2.23 in W x 1.66 in D x 3.75 in H (56.6 x 42.2 x 95.3 mm), which can help where panel space is limited.

Why this product exists

This product provides local manual switching for motor circuits without the size of a larger enclosed disconnect. The maintained toggle stays in position until operated, which is useful for straightforward ON/OFF motor control in equipment builds.

Compared with similar products

Compared with enclosed motor disconnects, this open-style controller is better suited to protected panel interiors. Compared with lighter-duty switches, this unit is built for industrial motor control use with maintained contact operation and 2-pole 600 VAC switching. Verify enclosure, SCCR, and protection requirements for the full assembly before selection.

Specifications

Manufacturer part number: AHMC240C
Brand: Eaton Arrow Hart
Product type: Manual motor controller
Contact action: Maintained contact, 2-position
Poles: 2
Current rating: 40A
Voltage rating: 600 VAC
Phase: Single-phase
Actuator: Toggle
Termination: Side wire, screw and clamp
Mounting: Panel mount
Enclosure style: Open
Material: Nylon, black
Approximate dimensions: 2.23 in W x 1.66 in D x 3.75 in H (56.6 x 42.2 x 95.3 mm)
Standards: UL 508, cULus Listed, RoHS compliant
Trade note: Manual motor controllers are commonly used for local motor switching, but overload protection and branch circuit protection must be matched to the equipment design and Canadian Electrical Code requirements.

- SKU
  CWD-AHMC240C
- Manufacturer Part #
  AHMC240C
Mounting
Panel mount
Poles
2
Dimensions
2.23 in W x 1.66 in D x 3.75 in H (56.6 x 42.2 x 95.3 mm)
Voltage
600 VAC
Current Rating
40A
Material
Nylon, black
Termination
Side wire, screw and clamp
Phase
Single-phase
Standards
UL 508, cULus Listed, RoHS compliant
Trade Note
Manual motor controllers are commonly used for local motor switching, but overload protection and branch circuit protection must be matched to the equipment design and Canadian Electrical Code requirements.
Actuator
Toggle
Contact Action
Maintained contact, 2-position
Brands
Cooper Wiring Devices
Stock in Elmira
1

Aptico Supply Delivery

Fast Electrical Supply Delivery Across Ontario

Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.

Shop Products Ask About Delivery

Real-Time Inventory

Contractor Delivery Routes

Elmira & Flesherton Pickup

Local Ontario Service

Delivery Built Around Electrical Contractors

Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.

Free Daily Delivery

Free daily delivery is available for larger contractor accounts.

Order by 9:00 AM for morning delivery
Order by 2:00 PM for afternoon delivery
Available in qualifying local delivery areas

Free Weekly Delivery

Free weekly delivery is available for smaller accounts in select service areas.

Elmira area delivery: Tuesday
Flesherton area delivery: Thursday
Order by 11:00 AM on the route day

Pickup Options

Pickup is available from our Ontario locations for customers who prefer to collect their order directly.

Elmira pickup available
Flesherton pickup available
Call ahead for large or special-order items

Local Delivery Areas

See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.

Delivery Questions

Do you offer free delivery?

Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.

Can I pick up my order?

Yes, pickup is available from our Elmira and Flesherton locations.

Do delivery charges apply?

Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.

Can you deliver to jobsites?

Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.

Need Electrical Supplies Delivered?

Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.

Contact Aptico Supply

We accept the following payment methods:

Accepted payment methods

To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.

This page is intended for your policy regarding returns and refunds.

Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.

To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.