4200 lm LED shop light 4 ft 42W 4000K linkable white · Satco 62-928

What this product is for

The Satco 62-928 is a 4 ft (1.2 m) LED shop light for general task and utility lighting in workshops, garages, sheds, laundry rooms, and similar indoor work areas. It provides 4200 lumens at 4000K with a white housing and linkable design for longer continuous runs.

Use for

Use for suspended or surface utility lighting where bright neutral-white light helps with bench work, storage visibility, and general workspace coverage. Commonly used in residential garages, maintenance rooms, light commercial back-of-house spaces, and work areas with 120V supply.

Avoid for

Avoid for applications requiring dimming, hazardous locations, or fully weather-exposed outdoor installation. Also avoid where a sealed vapour-tight fixture is required.

Best for

Best for electricians and contractors needing a straightforward 4 ft utility fixture with plug-in convenience, pull-chain switching, and linkable installation. A typical lighting rule of thumb for workshops is approximately 20 to 40 lumens per sq ft, so this fixture is commonly used for task-oriented areas depending on mounting height and layout. Actual light levels depend on spacing, reflectance, and installation conditions.

Installed in

Typically installed in garages, workshops, storage rooms, utility rooms, sheds, and damp indoor service spaces. Suitable for chain-hung or similar utility mounting methods where a linear shop light format is preferred.

Why this product exists

This fixture is designed to replace older fluorescent shop lights with a lower-maintenance LED alternative that delivers instant-on light, reduced relamping, and simple linkable expansion. It suits buyers who want a ready-to-install shop light rather than assembling a strip fixture and lamps separately.

Compared with similar products

Compared with basic non-linkable shop lights, this model supports connected runs for broader coverage. Compared with warmer 3000K fixtures, the 4000K output is better suited to utility and task spaces where neutral-white light is commonly preferred. Compared with higher-output industrial strips, this is a lighter-duty shop light intended for everyday work areas rather than high-bay or warehouse applications.

Specifications

• Manufacturer part number: 62-928
• Brand: Satco
• Product type: LED shop light fixture
• Nominal length: 4 ft (1.2 m)
• Input power: 42W
• Light output: 4200 lumens
• Colour temperature: 4000K
• CRI: 80
• Voltage: 120V
• Beam spread: 120 deg
• Finish: White
• Linkable: Yes
• Switching: Pull chain
• Cord: 5 ft plug-in cord
• Location rating: Damp location
• Warranty: 5 years
• Construction note: Metal backing with plastic end caps and acrylic optical cover