- Stock 24
:
from
to
Clear
Clear
Enclosed control transformer 2000 VA 240 x 480V to 12 x 24V Type 1 enclosure Delta DCE2000PH
SKU: DE-DCE2000PH
Delta DCE2000PH is a 2000 VA single-phase enclosed control transformer with 240 x 480V primary and 12 x 24V secondary taps for industrial control circuits. It is commonly used in control panels, HVAC equipment, timers and solenoids where isolated low-voltage control power is required.
What this product is for
This enclosed control transformer steps 240 x 480V primary power down to 12 x 24V secondary control voltage for industrial and commercial equipment. It is intended for panel builders, electricians and maintenance teams that need isolated control power in a metal enclosure.
Use for
Use for control panels, HVAC panels, controllers, power timers, relays and solenoids. It is a practical choice where 50/60 Hz single-phase control power is needed and a Type 1 enclosed transformer is preferred for indoor mounting.
Avoid for
Avoid using this transformer as a general distribution transformer, for outdoor wet locations, or where a higher enclosure rating is required. Do not size it only by nameplate voltage without confirming the connected control load in VA.
Best for
Best for machinery and OEM control panels that need 12V or 24V control voltage from a 240/480V supply. The enclosed format helps simplify mounting and protection in light-duty industrial and commercial environments.
Installed in
Typically installed in electrical rooms, machine skids, industrial control cabinets and commercial equipment panels. Overall enclosure dimensions are approximately 6.60 x 9.10 x 6.00 in (168 x 231 x 152 mm), with mounting centres about 5.10 x 5.70 in (130 x 145 mm).
Why this product exists
Control devices often require lower, isolated voltage than the incoming line supply. This transformer provides that control voltage while helping protect sensitive control components from direct line voltage exposure.
Compared with similar products
Compared with open-style control transformers, this model includes a Type 1 metal enclosure for quicker installation and added protection in indoor applications. At 2000 VA and above, Delta lists a 180 deg C insulation class for this enclosed series. As typical guidance, leave headroom for inrush from contactors and solenoids when sizing control transformers. Actual performance depends on connected load, duty cycle and installation conditions.
Specifications
- Manufacturer: Delta
- Part number: DCE2000PH
- Product family: General Purpose Enclosed Control Transformer
- Type: Enclosed control transformer
- Phase: Single-phase
- Frequency: 50/60 Hz
- VA rating: 2000 VA
- Primary voltage: 240 x 480V, 230 x 460V, 220 x 440V
- Secondary voltage: 12 x 24V, 11.5 x 23V, 11 x 22V
- Output current: 16.7/8.33 A
- Conductor material: Copper
- Enclosure type: Type 1
- Enclosure finish: Grey ANSI-61
- Insulation class: 180 deg C for 2000 VA and above in this series
- Overall dimensions: 6.60 x 9.10 x 6.00 in (168 x 231 x 152 mm)
- Mounting centres: 5.10 x 5.70 in (130 x 145 mm)
- Mounting slot: 0.31 x 0.81 in (8 x 21 mm)
- Approximate ship weight: 38.1 lb (17.3 kg)
- Product FamilyGeneral Purpose Enclosed Control Transformer
- Frequency50/60 Hz
- PhaseSingle-phase
- Insulation Class180 deg C for 2000 VA and above in this series
- Enclosure TypeType 1
- Primary Voltage240 x 480V, 230 x 460V, 220 x 440V
- Secondary Voltage12 x 24V, 11.5 x 23V, 11 x 22V
- Approximate Ship Weight38.1 lb (17.3 kg)
- Mounting Slot0.31 x 0.81 in (8 x 21 mm)
- Mounting Centres5.10 x 5.70 in (130 x 145 mm)
- Output Current16.7/8.33 A
- Conductor MaterialCopper
- Overall Dimensions6.60 x 9.10 x 6.00 in (168 x 231 x 152 mm)
- VA Rating2000 VA
- BrandsDelta Electronics
- Stock in Elmira1
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.