2-Gang Deep Device Box · 5-hole 1/2 in NPT threaded entries · weatherproof die-cast aluminium · RAB Design 095788

What this product is for

This 2-gang deep weatherproof device box is used to mount wiring devices or make junctions in exposed outdoor, commercial, and industrial conduit runs. It is suited to installations where a cast box with threaded hubs is required.

Use for

Use for exterior receptacles, switches, junction points, and surface-mounted device installations with 1/2 in NPT threaded conduit fittings. Commonly used on walls, service areas, utility spaces, and other wet-location applications when paired with the correct cover and fittings.

Avoid for

Avoid for concealed indoor wall framing where a standard device box is more appropriate, or for conduit systems requiring 3/4 in hubs. Do not use without a compatible weatherproof cover where the installation is exposed to moisture.

Best for

Best for electricians needing a 2-gang cast box with extra wiring space, five threaded entry points, and field-friendly mounting tabs. The deep body helps when device depth or conductor fill is a concern.

Installed in

Typically installed in outdoor commercial areas, industrial facilities, service corridors, parking structures, and exterior building walls. Suitable for wet-location box assemblies when installed with approved covers, plugs, and fittings.

Why this product exists

This box provides a weatherproof cast-aluminium option for 2-gang surface wiring where threaded conduit entry, corrosion resistance, and mechanical protection are needed. The five 1/2 in hubs give more routing flexibility than a basic 3-entry box.

Compared with similar products

Compared with a standard 2-gang weatherproof box, this deep box is intended more for junction and wiring space where additional conductor room is helpful. Compared with 3/4 in hub versions, this model is the correct choice when the raceway system is built around 1/2 in threaded fittings.

Specifications

• Brand: RAB Design
• Manufacturer part number: 095788
• Product family: DDB252P
• Type: 2-gang deep weatherproof device box
• Material: Die-cast aluminium
• Finish: Silver-grey powder coat
• Conduit entries: 5
• Hub size: 1/2 in NPT
• Shape: Rectangular
• Mounting hardware: Galvanized steel tabs
• Included: 2 threaded plugs, 2 galvanized steel mounting tabs, 1 ground screw, 2 screws
• Certification: cULus
• Trade note: A deep cast box is commonly chosen where extra conductor space or device depth is needed. Actual box fill and installation suitability depend on conductor count, device type, fittings, and local electrical code.