- Stock 18
:
from
to
Clear
Clear
Plug Connector · 50A 125/250V NEMA 14-50P Straight Blade AutoGrip Gray · Eaton 5745N
SKU: CWD-5745N
Straight blade industrial plug rated 50A at 125/250V AC in NEMA 14-50P configuration. AutoGrip cord clamp and back-wire termination support #12-4 AWG conductors for range, dryer, generator and other heavy-duty cord-connected equipment where a 3-pole, 4-wire grounding plug is required.
What this product is for
This is a straight blade cord-end plug for 125/250V AC circuits rated 50A. It is used where equipment requires a NEMA 14-50P, 3-pole, 4-wire grounding connection.
Use for
Use for replacement cords or new cord sets on ranges, dryers, generators, welders, temporary power equipment, and other heavy-duty loads that are specifically designed for a 50A NEMA 14-50 connection. Back-wire terminals and the AutoGrip cord clamp help speed assembly in the field.
Avoid for
Do not use where a locking device is required, where the equipment nameplate calls for a different NEMA configuration, or where conductor size falls outside the listed cord range. Do not substitute this plug for 6-50, 10-50, or other non-matching configurations.
Best for
Best for electricians and maintenance teams needing a straight 50A 125/250V plug with a nylon body, grounding connection, and field-friendly cord grip for industrial or heavy residential equipment.
Installed in
Typically installed on flexible cord serving shop equipment, appliance cords, generator leads, and temporary power assemblies in commercial, industrial, agricultural, and residential service applications.
Why this product exists
It provides a safe, serviceable cord-end connection for equipment that needs two hots, one neutral, and one ground on a 125/250V 50A circuit. Typical branch-circuit guidance for 50A applications is larger than common 15A to 30A cord and receptacle circuits, so matching the exact device configuration and equipment rating is critical.
Compared with similar products
Compared with angled plugs, this straight plug suits installations with adequate cord clearance behind the equipment. Compared with locking connectors, it is intended for standard straight blade NEMA 14-50 receptacles. Always match plug and receptacle configuration exactly. Actual suitability depends on equipment rating, cord type, installation conditions, and local electrical code.
Specifications
- Manufacturer part number: 5745N
- Brand: Eaton Arrow Hart, legacy Cooper Wiring Devices
- Device type: Plug connector, straight blade
- Current rating: 50A
- Voltage rating: 125/250V AC
- NEMA configuration: 14-50P
- Poles and wires: 3-pole, 4-wire, grounding
- Wiring method: Back wire
- Conductor size: #12-4 AWG
- Cord diameter range: 0.43 to 1.31 in (approximately 10.9 to 33.3 mm)
- Material: Nylon body with brass contacts
- Colour: Gray
- Application: Industrial, range and dryer style connection
- Standards: UL 498, CSA C22.2
- Conductor Size#12-4 AWG
- ApplicationIndustrial, range and dryer style connection
- ColourGray
- MaterialNylon body with brass contacts
- StandardsUL 498, CSA C22.2
- Voltage125/250V AC
- Current Rating50A
- NEMA Configuration14-50P
- Device TypePlug connector, straight blade
- Poles And Wires3-pole, 4-wire, grounding
- Wiring MethodBack wire
- Cord Diameter Range0.43 to 1.31 in (approximately 10.9 to 33.3 mm)
- BrandsCooper Wiring Devices
- Stock in Flesherton2
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.