Stock 2

Straight Blade Connector · 15A 250V NEMA 6-15R Auto Grip Back Wire · Eaton Arrow Hart 5669N

SKU: CWD-5669N

15A 250V straight blade cord connector with NEMA 6-15R configuration for 2-pole, 3-wire grounding applications. Eaton Arrow Hart 5669N uses an auto grip straight-body design with back-wire termination for #18-12 AWG conductors and a typical cord range of 0.22-0.66 in (5.6-16.8 mm).

What this product is for

This straight blade cord connector is used to terminate portable equipment cords on 15A 250V circuits where a NEMA 6-15R female connection is required. It is suited to industrial and commercial assemblies that need a secure cord-end device with grounding.

Use for

15A, 250V AC cord-end connections
NEMA 6-15 plug and connector applications
Portable tools, equipment cords, and extension cord repairs
Industrial and commercial environments using #18-12 AWG conductors

Avoid for

Circuits above 15A or 250V
NEMA configurations other than 6-15
Fixed building wiring in place of an approved wiring device method
Cords outside the listed diameter range

Best for

Best for electricians and maintenance teams needing a straight-body 2-pole, 3-wire grounding connector with back-wire termination and quick cord retention for shop equipment, portable loads, and replacement cord ends.

Installed in

Typically installed on flexible cords in commercial shops, industrial work areas, maintenance departments, and equipment power leads. Commonly used where 250V single-phase portable loads require a matching 6-15 configuration.

Why this product exists

The auto grip design helps speed cord-end assembly while maintaining secure conductor termination and cord retention. This reduces installation time compared with more cumbersome cord cap assemblies while keeping the device within its listed wire and cord range.

Compared with similar products

Compared with a matching 6-15P plug, this 5669N is the female cord connector side. Compared with higher-amperage 20A devices, it is intended only for 15A 250V applications and accepts a typical cord diameter range of 0.22-0.66 in (5.6-16.8 mm). Always match the NEMA configuration, circuit rating, and conductor size to the connected load and local code.

Specifications

Brand: Eaton Arrow Hart
Manufacturer part number: 5669N
Product type: Straight blade connector
Device type: Cord connector, straight body
Amperage: 15A
Voltage: 250V AC
NEMA configuration: 6-15R
Poles and wires: 2-pole, 3-wire grounding
Wiring method: Back wire
Connection type: Screw terminals
Allowable wire size: #18-12 AWG
Cord diameter range: 0.22-0.66 in (5.6-16.8 mm)
Contact material: Brass
Housing material: Nylon or polycarbonate/thermoplastic housing depending on source listing
Colour: Black/white family listing
Certification: cULus listed, CSA C22.2 No. 42 referenced in Eaton literature

- SKU
  CWD-5669N
- Manufacturer Part #
  5669N
Contact Material
Brass
Colour
Black/white family listing
Housing Material
Nylon or polycarbonate/thermoplastic housing depending on source listing
Approvals
cULus listed, CSA C22.2 No. 42 referenced in Eaton literature
Connection Type
Screw terminals
Voltage
250V AC
Current Rating
15A
NEMA Configuration
6-15R
Device Type
Cord connector, straight body
Poles And Wires
2-pole, 3-wire grounding
Wiring Method
Back wire
Allowable Wire Size
#18-12 AWG
Cord Diameter Range
0.22-0.66 in (5.6-16.8 mm)
Brands
Cooper Wiring Devices
Stock in Elmira
2

Aptico Supply Delivery

Fast Electrical Supply Delivery Across Ontario

Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.

Shop Products Ask About Delivery

Real-Time Inventory

Contractor Delivery Routes

Elmira & Flesherton Pickup

Local Ontario Service

Delivery Built Around Electrical Contractors

Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.

Free Daily Delivery

Free daily delivery is available for larger contractor accounts.

Order by 9:00 AM for morning delivery
Order by 2:00 PM for afternoon delivery
Available in qualifying local delivery areas

Free Weekly Delivery

Free weekly delivery is available for smaller accounts in select service areas.

Elmira area delivery: Tuesday
Flesherton area delivery: Thursday
Order by 11:00 AM on the route day

Pickup Options

Pickup is available from our Ontario locations for customers who prefer to collect their order directly.

Elmira pickup available
Flesherton pickup available
Call ahead for large or special-order items

Local Delivery Areas

See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.

Delivery Questions

Do you offer free delivery?

Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.

Can I pick up my order?

Yes, pickup is available from our Elmira and Flesherton locations.

Do delivery charges apply?

Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.

Can you deliver to jobsites?

Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.

Need Electrical Supplies Delivered?

Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.

Contact Aptico Supply

We accept the following payment methods:

Accepted payment methods

To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.

This page is intended for your policy regarding returns and refunds.

Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.

To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.