Insulated multi-tap connector · 2-port · #10 AWG to 250 kcmil · clear double-sided entry · Techspan IPBNA502D

What this product is for

The Techspan IPBNA2502D is a clear insulated mechanical multi-tap connector used to join or tap conductors in power distribution, control, and feeder applications. It is typically selected where a compact insulated splice or tap point is needed inside panels, troughs, raceways, cable trays, or junction enclosures.

Use for

Use for 600 V copper or aluminium conductor connections within the listed wire range, including branch taps, distribution points, equipment connections, and retrofit splicing. The clear insulation helps electricians confirm conductor insertion during installation.

Avoid for

Avoid using this connector outside its listed conductor range, in direct-burial applications unless separately approved for that use, or where a bolted lug or mountable power distribution block is required instead of an inline insulated tap connector.

Best for

Best for commercial and industrial work where you need a 2-port insulated connector with double-sided conductor entry, oxide inhibitor, and a broad wire range up to 250 kcmil. It is a practical choice when space is limited and insulated mechanical termination is preferred over taped or field-insulated splices.

Installed in

Commonly installed in electrical panels, wireways, troughs, cable trays, control cabinets, and other enclosed distribution assemblies. Actual suitability depends on enclosure space, conductor class, torque requirements, and local electrical code.

Why this product exists

This style of insulated power bar simplifies conductor tapping and splicing while maintaining touch-safe insulation around the connector body. Factory clear insulation and pre-filled oxide inhibitor help reduce installation steps compared with bare mechanical connectors that require separate insulating methods.

Compared with similar products

Compared with single-sided entry insulated connectors, this double-sided entry design can make conductor routing easier where cables approach from opposite directions. Compared with mountable distribution blocks, it is better suited to inline splicing and tapping rather than fixed-base mounting. As a rule of thumb, electricians often choose this style when they need a compact insulated tap connector rather than a lug or terminal block.

Specifications

• Manufacturer part number: IPBNA2502D
• Brand: Techspan
• Product type: Insulated mechanical multi-tap connector
• Configuration: 2-port, double-sided entry
• Conductor range: #10 AWG to 250 kcmil
• Conductor material compatibility: Copper and aluminium conductors, dual-rated where listed
• Connector material: Aluminium alloy
• Insulation: Clear factory insulation
• Voltage rating: Up to 600 V
• Pre-filled inhibitor: Yes, oxide inhibitor included
• Typical applications: Cable trays, raceways, ducts, troughs, panels, and enclosed distribution equipment