- Stock 1
:
from
to
Clear
Clear
Splitter Trough · 600A, 600 VAC, NEMA 1, 72 x 10 x 6 in - EXM 1100 T6604
SKU: EXM-1100 T6604
Steel splitter trough for up to 600A, 600 VAC power distribution in ordinary indoor locations. This EXM 1100 Series unit includes factory-installed insulated splitter blocks, concentric knockouts, and a padlockable door for commercial and industrial service equipment layouts.
What this product is for
This steel splitter trough is used to split and distribute feeder conductors in commercial and industrial electrical systems. It is built for up to 600A, 600 VAC service in ordinary indoor locations where a NEMA 1 enclosure is suitable.
Use for
Use for indoor power distribution, service entrance transitions, feeder taps, and multi-circuit distribution layouts where a splitter trough with factory-installed insulated blocks is required. Commonly used by electricians and contractors in panel rooms, electrical rooms, and service distribution areas.
Avoid for
Avoid using this trough in wet locations, washdown areas, or outdoor installations unless the installation is otherwise protected and code-compliant. NEMA 1 and IP30 construction is intended for ordinary indoor locations only.
Best for
Best for contractors needing a 600A indoor splitter trough with lay-in lug access, concentric knockouts on all sides, and a straightforward wall or panel mounting format. It suits projects where serviceability and conductor routing matter.
Installed in
Typically installed in commercial buildings, industrial facilities, service rooms, utility areas, and other indoor electrical distribution spaces. The enclosure measures 72 x 10 x 6 in (approximately 1829 x 254 x 152 mm).
Why this product exists
This product provides a practical way to divide incoming power to multiple downstream circuits while keeping conductors enclosed and accessible. Factory-installed insulated splitter blocks and removable lug tops help reduce field assembly time and simplify conductor placement.
Compared with similar products
Compared with smaller splitter troughs, this 600A model is intended for higher-capacity feeder distribution. Compared with outdoor or gasketed enclosures, this NEMA 1 steel trough is intended for indoor use where environmental sealing is not required.
Specifications
- Brand: EXM
- Manufacturer part number: 1100 T6604
- Series: 1100 Series
- Product type: Splitter trough
- Amperage rating: 600A
- Voltage rating: 600 VAC maximum
- Enclosure rating: NEMA 1, EEMAC 1, IP30
- Material: Steel
- Finish: Grey polyester powder-coated
- Dimensions: 72 in H x 10 in W x 6 in D (approximately 1829 x 254 x 152 mm)
- Knockouts: 2 knockouts, 2-1/2 to 3 in
- Wire range: 1/0 AWG to 250 kcmil, and 14 to 4/0 AWG
- Mounting: Panel mount with internal mounting holes
- Features: Factory-installed insulated splitter blocks, concentric knockouts on all sides, removable lug tops, padlockable door
- Certification: CSA Certified, ANSI/ASA 61 specified
- MaterialSteel
- ApprovalsCSA Certified, ANSI/ASA 61 specified
- MountingPanel mount with internal mounting holes
- Dimensions72 in H x 10 in W x 6 in D (approximately 1829 x 254 x 152 mm)
- Series1100 Series
- Enclosure RatingNEMA 1, EEMAC 1, IP30
- Voltage600 VAC maximum
- FinishGrey polyester powder-coated
- Wire Range1/0 AWG to 250 kcmil, and 14 to 4/0 AWG
- Amperage Rating600A
- FeaturesFactory-installed insulated splitter blocks, concentric knockouts on all si
- Knockouts2 knockouts, 2-1/2 to 3 in
- BrandsEXM Manufacturing
- Stock in Elmira1
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.