:
from
to
Clear
Clear
Receptacle · 60A 125/250V NEMA 14-60R flush mount · Cooper Wiring Devices 9460N
SKU: CWD-9460N
60A 125/250V industrial grade flush receptacle for NEMA 14-60R applications. Suitable for heavy-duty equipment connections where a 3-pole, 4-wire grounding device and #12 to #4 AWG copper wire termination are required.
What this product is for
This flush mount industrial receptacle is used for 125/250V power connections on equipment requiring a NEMA 14-60R configuration. It is intended for heavy-duty commercial and industrial installations where a 60A straight blade receptacle is specified.
Use for
Use for generators, welders, industrial equipment, temporary power distribution, and other applications that call for a 60A, 125/250V, 3-pole, 4-wire grounding receptacle. Commonly installed in flush wall boxes or equipment enclosures.
Avoid for
Avoid using this receptacle where a different NEMA configuration, locking device, weatherproof assembly, or lower ampere rating is required. Do not use it on circuits that do not match the receptacle rating and configuration.
Best for
Best for electricians and contractors replacing or specifying a heavy-duty straight blade receptacle for industrial service. It is a practical choice when you need a flush mount 14-60R device with screw termination and industrial grade construction.
Installed in
Typically installed in industrial facilities, service areas, equipment rooms, workshops, construction power setups, and other demanding indoor locations. Flush receptacles of this type are commonly fitted in one-gang or two-gang enclosures where permitted by the device layout and box selection.
Why this product exists
This product provides a standardized 60A straight blade connection for equipment that needs both 125V and 250V service with grounding. It helps match the correct plug and receptacle configuration while supporting larger copper conductors from #12 AWG to #4 AWG.
Compared with similar products
Compared with lower-amp receptacles such as 30A or 50A devices, this 60A NEMA 14-60R receptacle is selected for higher load equipment and matching plug configurations. Unlike locking devices, it uses a straight blade format, so it should only be chosen where NEMA 14-60R is specifically required.
Typical circuit guidance: a 60A receptacle should only be used on a properly engineered circuit with matching overcurrent protection, conductor sizing, enclosure selection, and local code compliance. Actual installation requirements depend on equipment load, duty cycle, ambient conditions, and applicable electrical code.
Specifications
- Type: Single flush mount power receptacle
- Current rating: 60A
- Voltage rating: 125/250V AC
- NEMA configuration: 14-60R
- Poles and wires: 3-pole, 4-wire grounding
- Wiring: Screw termination, back/side wire style as listed by source
- Conductor range: #12 to #4 AWG copper wire
- Mounting: Flush mount
- Face colour: Black
- Material: Glass-filled nylon
- Voltage125/250V AC
- MaterialGlass-filled nylon
- MountingFlush mount
- Current Rating60A
- NEMA Configuration14-60R
- Poles And Wires3-pole, 4-wire grounding
- WiringScrew termination, back/side wire style as listed by source
- Conductor Range#12 to #4 AWG copper wire
- Face ColourBlack
- BrandsCooper Wiring Devices
- Stock in Elmira1
- Stock in Flesherton2
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.
