- Stock 74
:
from
to
Clear
Clear
Manual Generator Panel · 60A · Switched Neutral 14/28 Circuits · Eaton CBRPL120G6
SKU: EAT-CBRPL120G6
60A manual generator panel for residential backup power systems, with switched neutral and space for up to 14 full-size or 28 tandem branch circuits. Commonly used to transfer selected loads from utility to generator power during outages; actual installation and circuit capacity depend on breaker selection, feeder sizing, and local electrical code.
What this product is for
This Eaton manual generator panel is used to transfer selected branch circuits from utility power to generator power during an outage. It is intended for indoor residential backup power installations where a dedicated emergency panel is preferred over moving circuits manually at the main loadcentre.
Use for
Use for portable generator backup systems, critical household circuits, sump pumps, refrigeration, lighting, furnace controls, and other selected loads that need manual transfer capability. It is suitable for new installations and retrofit applications where a switched neutral generator panel is required.
Avoid for
Avoid using this panel as a whole-home automatic transfer switch or for outdoor installations. It is not a complete generator system and does not include the generator, inlet box, feeder breaker, or branch breakers.
Best for
Best for electricians and contractors building a code-compliant manual backup setup with selected essential circuits. The switched neutral design can be an important buying factor where generator bonding and transfer requirements call for neutral switching.
Installed in
Typically installed indoors beside or near an existing main panel in houses, cottages, and light residential occupancies. The enclosure is EEMAC 1 rated for indoor use.
Why this product exists
This panel provides a dedicated, mechanically interlocked way to transfer critical loads to generator power while helping prevent dangerous dual-source backfeeding. It gives contractors a cleaner branch-circuit backup layout than ad hoc circuit management during outages.
Compared with similar products
Compared with smaller 6/12 circuit Eaton generator panels, this model provides a larger 14/28 circuit format while keeping the same 60A generator breaker rating. Compared with a standard loadcentre, it is purpose-built for manual generator transfer applications and is designed for switched neutral use. Typical buying note: a 60A panel can support substantial selected loads, but actual usable load depends on generator output, load diversity, and connected circuit demand.
Specifications
- Brand: Eaton
- Manufacturer part number: CBRPL120G6
- Product type: Manual transfer switch / generator panel
- Generator breaker rating: 60 A
- Bus rating: 125 A
- Switched neutral: Yes
- Maximum branch circuits: 14/28
- Phase: Single-phase
- Voltage system: 120/240 VAC
- Enclosure rating: EEMAC 1 indoor
- Interrupt rating: 10 kAIC in Eaton transfer switch catalogue; 25 kAIC listed by distributor product data, so confirm project requirement before ordering
- Dimensions: 21.00 in H x 14.38 in W x 3.88 in D (533 x 365 x 98 mm)
- Breaker format: Type BR/DNPL branch breakers sold separately
- Installation note: Transfer switch panel must be supplied with neutral and ground
- Application note: Typical installation uses a 2-pole 60A feeder breaker from the existing main panel, but feeder and breaker selection must match the installation design and code requirements.
Estimated buying guidance only: actual performance depends on generator capacity, connected loads, installation conditions, and local electrical code.
- Dimensions21.00 in H x 14.38 in W x 3.88 in D (533 x 365 x 98 mm)
- Enclosure RatingEEMAC 1 indoor
- PhaseSingle-phase
- Interrupt Rating10 kAIC in Eaton transfer switch catalogue; 25 kAIC listed by distributor product data, so confirm project requirement before ordering
- Application NoteTypical installation uses a 2-pole 60A feeder breaker from the existing main panel, but feeder and breaker selection must match the installation design and code requirements.
- Installation NoteTransfer switch panel must be supplied with neutral and ground
- Breaker FormatType BR/DNPL branch breakers sold separately
- BrandsEaton
- Stock in Flesherton1
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.