AC disconnect switch · 60A 2-pole non-fusible pullout NEMA 3R outdoor · Eaton 3GAC222NF
60A 2-pole non-fusible pullout AC disconnect for 120/240 VAC single-phase HVAC equipment. NEMA 3R steel enclosure for outdoor installation, commonly used as a local service disconnect for residential and light commercial condensers and heat pumps.
What this product is for
This AC disconnect switch provides a local means to isolate power to outdoor air conditioners, condensers and heat pumps during service or replacement. It is a 60A, 2-pole, non-fusible pullout disconnect in a NEMA 3R outdoor steel enclosure.
Use for
Use for 120/240 VAC single-phase HVAC equipment where a nearby service disconnect is required. Commonly installed beside outdoor condensing units in residential and light commercial applications.
Avoid for
Avoid where overcurrent protection must be provided in the disconnect itself, since this model is non-fusible. Do not use where a different voltage, pole configuration or enclosure type is required by the equipment nameplate or local code.
Best for
Best for standard outdoor HVAC disconnect applications needing a visible pullout style disconnect, 60A rating, and weather-resistant NEMA 3R enclosure.
Installed in
Typically installed outdoors beside condensers, heat pumps and similar equipment. Enclosure size is approximately 8.79 in x 5.4 in x 3.76 in (223 x 137 x 96 mm).
Why this product exists
HVAC equipment usually needs a local disconnect within sight of the unit so technicians can service equipment safely. This pullout design provides a simple visible means of isolation and stores the handle in the off position to help prevent misplacement.
Compared with similar products
Compared with fusible AC disconnects, this non-fusible model is used where branch overcurrent protection is already provided upstream. Compared with larger general-duty safety switches, this pullout AC disconnect is more compact for typical condenser installations. Typical buying check: confirm the equipment MCA/MOCP and local code requirements before selecting a 60A disconnect. Actual suitability depends on the equipment nameplate, conductor sizing and overcurrent protection.
Specifications
- Brand: Eaton
- Manufacturer part number: 3GAC222NF
- Product type: Air conditioner disconnect switch
- Amperage rating: 60 A
- Poles: 2
- Voltage rating: 120/240 VAC
- Phase: Single-phase
- Type: Non-fusible pullout
- Enclosure rating: NEMA 3R outdoor
- Enclosure material: Painted steel
- Number of wires: 2
- Short-circuit rating: 10 kA
- Horsepower rating: 10 hp at 240 VAC, 1 phase
- Approximate dimensions: 8.79 in L x 5.4 in W x 3.76 in H (223 x 137 x 96 mm)
- Knockouts: 3 for 1/2 in or 3/4 in, and 4 for 1/2 in, 3/4 in, 1 in or 1-1/4 in conduit
- Voltage120/240 VAC
- Dimensions8.79 in L x 5.4 in W x 3.76 in H (223 x 137 x 96 mm)
- PhaseSingle-phase
- Horsepower Rating10 hp at 240 VAC, 1 phase
- Amperage Rating60 A
- Poles2
- Enclosure RatingNEMA 3R outdoor
- Knockouts3 for 1/2 in or 3/4 in, and 4 for 1/2 in, 3/4 in, 1 in or 1-1/4 in conduit
- Enclosure MaterialPainted steel
- Short-Circuit Rating10 kA
- BrandsEaton
- Stock in Elmira1
- Stock in Flesherton5
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.