- Stock 40
:
from
to
Clear
Clear
AC Disconnect Switch · 60A 2-Pole 240V Non-Fusible NEMA 3R - Eaton DPB222R
SKU: EAT-DPB222R
Eaton DPB222R is a 60A, 2-pole, 240V non-fusible AC disconnect switch for outdoor HVAC equipment and similar loads. It provides a local means of isolation for service work, with a NEMA 3R galvanized steel enclosure, 10 kAIC rating, and terminals for #14 to #3 AWG copper or aluminium conductors.
What this product is for
This AC disconnect switch is used to isolate power to outdoor air conditioners, condensers, heat pumps, and similar equipment during service and maintenance. The Eaton DPB222R is a non-fusible, 2-pole disconnect rated 60A at 240V AC.
Use for
Use for HVAC service disconnect applications where a local disconnecting means is required near the equipment. It is commonly used on residential and light commercial air conditioning equipment installed outdoors.
Avoid for
Avoid using this unit where overcurrent protection must be provided by the disconnect itself, since this is a non-fusible switch. Do not use it where enclosure type, voltage, interrupt rating, horsepower rating, or conductor range do not match the installation requirements.
Best for
Best for contractors who need a compact outdoor disconnect for condensers and similar 240V equipment, especially where a NEMA 3R rainproof enclosure and visible local isolation are required.
Installed in
Typically installed beside outdoor condensing units, heat pumps, and rooftop or wall-mounted HVAC equipment. The enclosure is NEMA 3R for outdoor use. Product size is approximately 5.3 in D x 3.74 in W x 8.6 in H (135 x 95 x 218 mm).
Why this product exists
It provides a code-driven local disconnecting means so technicians can safely service equipment without returning to the main panel. For many HVAC installations, this type of disconnect is selected when branch overcurrent protection is already provided upstream.
Compared with similar products
Compared with a fusible disconnect, this model does not accept fuses and relies on upstream protection. Compared with lower-amp AC disconnects, the 60A rating can suit larger equipment where the nameplate and branch circuit design call for it. As typical trade guidance, disconnect selection should follow the equipment MCA/MOCP and local code requirements. Actual suitability depends on the equipment nameplate, conductor sizing, and installation conditions.
Specifications
- Brand: Eaton
- Manufacturer part number: DPB222R
- Product type: Air conditioning disconnect switch
- Switch type: Molded case switch
- Amperage rating: 60A
- Poles: 2-pole
- Voltage rating: 240V AC
- Fuse type: Non-fusible
- Interrupt rating: 10 kAIC
- Horsepower rating: 10 hp at 240V
- Enclosure type: NEMA 3R
- Enclosure material: Galvanized steel
- Colour: ANSI 61 gray
- Conductor range: #14 to #3 AWG copper or aluminium, 60 degC or 75 degC
- Certifications: UL Listed, CSA Certified
- Dimensions: 5.3 in D x 3.74 in W x 8.6 in H (135 x 95 x 218 mm)
- Weight: 3.11 lb (1.41 kg)
- Conductor Range#14 to #3 AWG copper or aluminium, 60 degC or 75 degC
- Voltage240V AC
- Poles2-pole
- Interrupt Rating10 kAIC
- Dimensions5.3 in D x 3.74 in W x 8.6 in H (135 x 95 x 218 mm)
- ApprovalsUL Listed, CSA Certified
- Weight3.11 lb (1.41 kg)
- Enclosure TypeNEMA 3R
- Amperage Rating60A
- ColourANSI 61 gray
- Fuse TypeNon-fusible
- Switch TypeMolded case switch
- Enclosure MaterialGalvanized steel
- Horsepower Rating10 hp at 240V
- BrandsEaton
- Stock in Elmira2
- Stock in Flesherton6
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.