Motor Starter · 240 V Coil 25 7.5 hp 3-Phase NEMA 1 with ON-OFF Selector Switch · Eaton ECX09G5BB· MS29
What this product is for
This enclosed motor starter is used to start and stop AC motors while providing overload protection in industrial and light commercial control panels. It is an Eaton XT IEC electronic motor starter in a non-combination, non-reversing configuration with a 240 V coil, 25 A rating, and NEMA 1 enclosure.
Use for
Use for 230 V 3-phase motors up to 7.5 hp, or 230 V single-phase motors up to 5 hp, where a compact enclosed starter with overload protection is needed. Typical applications include pumps, fans, compressors, conveyors, and general machinery.
Avoid for
Avoid for reversing duty, combination starter applications requiring an integral disconnect, or washdown and outdoor locations that need a higher enclosure rating than NEMA 1 and IP23. Also avoid using it outside the stated overload range or motor horsepower ratings.
Best for
Best for electricians and maintenance teams replacing or specifying an enclosed across-the-line starter for indoor equipment rooms, mechanical spaces, and manufacturing equipment. The 16-24 A overload range suits motors with full-load current in that band.
Installed in
Typically installed in indoor industrial areas, service rooms, plant equipment zones, and OEM machinery panels. Overall size is approximately 10.01 in x 6 in x 5.98 in (254 x 152 x 152 mm), which helps when checking wall or panel clearance.
Why this product exists
This product combines motor switching and overload protection in one enclosed assembly to simplify motor control selection and replacement. It is intended for full-voltage, non-reversing motor starting with straightforward field application.
Compared with similar products
Compared with an open starter, this enclosed version is easier to apply where basic finger-safe indoor enclosure protection is needed. Compared with a combination starter, it does not include an integral disconnect. As a rule of thumb, motor starters should be matched to the motor nameplate full-load current and control voltage, and actual suitability depends on motor service factor, duty cycle, and local electrical code.
Specifications
- Manufacturer: Eaton
- Series: XT IEC electronic motor starter
- Part number: ECX09G5BBA-MS29
- Type: Non-combination non-reversing starter
- Coil voltage: 240 V
- Motor rating: 7.5 hp at 230 V 3-phase; 5 hp at 230 V single-phase
- Current rating: 25 A
- Overload range: 16-24 A
- Overload relay: XTOB, 16-24 FLA
- Enclosure: NEMA 1
- Degree of protection: IP23
- Actuator: ON-OFF selector switch
- Application: Full-voltage motor starting and overload protection
- Certifications: UL Listed, cUL Listed
- Approximate dimensions: 10.01 in L x 6 in W x 5.98 in H (254 x 152 x 152 mm)
- Approximate weight: 5.2 lb (2.4 kg)
- SeriesXT IEC electronic motor starter
- Approximate Weight5.2 lb (2.4 kg)
- Coil Voltage240 V
- ApplicationFull-voltage motor starting and overload protection
- EnclosureNEMA 1
- Motor Rating7.5 hp at 230 V 3-phase; 5 hp at 230 V single-phase
- Current Rating25 A
- Dimensions10.01 in L x 6 in W x 5.98 in H (254 x 152 x 152 mm)
- ApprovalsUL Listed, cUL Listed
- ActuatorON-OFF selector switch
- Degree Of ProtectionIP23
- Overload Range16-24 A
- BrandsEaton
- Stock in Elmira1
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.