Male connector insert · 10A 8-pole crimp size 21.21 · ILME CDM08

Stock 13

Male connector insert · 10A 8-pole crimp size 21.21 · CDM08 Industria Lombarda Materiale Elettrico

SKU: ILM-CDM08

Male 8-pole rectangular connector insert rated 10A with crimp termination for ILME CD series size 21.21 housings. Commonly used in machinery and control panels where a compact heavy-duty insert is needed; contacts are ordered separately.

What this product is for

The ILME CDM08 is a male contact insert for heavy-duty rectangular industrial connectors. It is used to build pluggable power or control connections in machinery, panels, and equipment where serviceability and repeatable mating are important.

Use for

Use for control panel wiring, machine connections, equipment interfaces, and other industrial connector assemblies using ILME CD series size 21.21 housings. This insert uses crimp contacts and is suited to applications needing 8 poles at up to 10A.

Avoid for

Avoid ordering this insert alone if you also need contacts, housings, or cable entry components, because this part is the insert only. Avoid using it outside the published voltage, current, wire range, temperature, and enclosure compatibility requirements.

Best for

Best for electricians, panel builders, and OEM maintenance teams standardizing on ILME heavy-duty rectangular connectors with crimp terminations. It is a practical choice when you want field-serviceable terminations and a compact 8-pole insert format.

Installed in

Typically installed in compatible ILME size 21.21 rectangular connector housings on machines, skids, industrial panels, and automation equipment. Final environmental protection depends on the matching housing and seal system, not the insert alone.

Why this product exists

This insert provides a standardized plug-in connection point inside a heavy-duty connector assembly. Compared with hard-wired terminations, insert-and-housing systems can simplify equipment assembly, replacement, and maintenance.

Compared with similar products

Compared with screw-terminal inserts, this crimp-style insert is commonly chosen where consistent terminations and repeatable assembly matter. Compared with higher-pole inserts, the 8-pole layout suits smaller control or low-voltage circuits. Actual suitability depends on the full connector assembly, conductor size, and local electrical code.

Specifications

Manufacturer: ILME
Part number: CDM08
Product type: Male contact insert
Series: CD
Poles: 8
Current rating: 10A
Rated voltage: 50V
UL/CSA rated voltage: 50V AC / 120V DC
Rated impulse withstand voltage: 0.8 kV
Pollution degree: 3
Termination: Crimp
Housing size: 21.21
Wire range: #26 to #14 AWG (approximately 0.14 to 2.5 sq mm), depending on contact used
Operating temperature: -40 deg C to 125 deg C (-40 deg F to 257 deg F)
Material: Thermoplastic or polycarbonate body, depending on source listing
Mechanical durability: approximately 500 mating cycles
Contacts included: No, order separately
Typical approvals/listings referenced by sources: UL, CSA, CCC, GL, RoHS

- SKU
  ILM-CDM08
- Manufacturer Part #
  CDM08
Series
CD
Termination
Crimp
Operating Temperature
-40 deg C to 125 deg C (-40 deg F to 257 deg F)
Material
Thermoplastic or polycarbonate body, depending on source listing
Current Rating
10A
Wire Range
#26 to #14 AWG (approximately 0.14 to 2.5 sq mm), depending on contact used
Poles
8
Rated Voltage
50V
Mechanical Durability
approximately 500 mating cycles
Pollution Degree
3
Rated Impulse Withstand Voltage
0.8 kV
Housing Size
21.21
Brands
Industria Lombarda Materiale Elettrico
Stock in Elmira
13

Aptico Supply Delivery

Fast Electrical Supply Delivery Across Ontario

Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.

Shop Products Ask About Delivery

Real-Time Inventory

Contractor Delivery Routes

Elmira & Flesherton Pickup

Local Ontario Service

Delivery Built Around Electrical Contractors

Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.

Free Daily Delivery

Free daily delivery is available for larger contractor accounts.

Order by 9:00 AM for morning delivery
Order by 2:00 PM for afternoon delivery
Available in qualifying local delivery areas

Free Weekly Delivery

Free weekly delivery is available for smaller accounts in select service areas.

Elmira area delivery: Tuesday
Flesherton area delivery: Thursday
Order by 11:00 AM on the route day

Pickup Options

Pickup is available from our Ontario locations for customers who prefer to collect their order directly.

Elmira pickup available
Flesherton pickup available
Call ahead for large or special-order items

Local Delivery Areas

See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.

Delivery Questions

Do you offer free delivery?

Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.

Can I pick up my order?

Yes, pickup is available from our Elmira and Flesherton locations.

Do delivery charges apply?

Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.

Can you deliver to jobsites?

Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.

Need Electrical Supplies Delivered?

Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.

Contact Aptico Supply

We accept the following payment methods:

Accepted payment methods

To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.

This page is intended for your policy regarding returns and refunds.

Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.

To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.