60 Amp 2 Pole Standard CH Circuit Breaker · Eaton CH260
What this product is for
This breaker provides branch circuit overcurrent and short-circuit protection in Eaton Type CH loadcentres and panelboards. It is used where a 2-pole common-trip breaker is required for 120/240V circuits.
Use for
Use for properly matched Eaton CH panels, subpanels, and equipment requiring a 60A 2-pole breaker. Common applications include feeders, electric heat, shop equipment, compressors, welders, and other 240V loads where the panel schedule and local code call for a 60A CH breaker.
Avoid for
Do not use in non-CH panels or as a substitute for another breaker family. Do not use where AFCI, GFCI, or other specialty protection is required unless the circuit design specifically allows a standard thermal-magnetic breaker.
Best for
Best for electricians replacing or adding a standard Eaton CH series 2-pole breaker in residential or light commercial distribution equipment. This format suits applications that need common trip and standard plug-on installation.
Installed in
Installed in Eaton Type CH loadcentres and compatible CH panelboards. The breaker mounts as a plug-on unit and occupies 2 poles.
Why this product exists
It gives matched overcurrent protection for CH distribution systems while maintaining proper fit, bus connection, and listing within the intended Eaton panel family. Using the correct breaker family matters for code compliance and equipment compatibility.
Compared with similar products
Compared with other Eaton breaker families such as BR, this CH breaker is made for CH series equipment and is not interchangeable. Compared with AFCI or GFCI breakers, this is a standard thermal-magnetic breaker for circuits that do not require additional fault protection. As typical guidance, a 60A breaker is commonly paired with conductors sized to suit the load, termination rating, and applicable code. Actual conductor sizing depends on installation conditions, insulation, equipment markings, and local electrical code.
Specifications
Manufacturer: Eaton
Part number: CH260
Breaker family: Type CH
Pole configuration: 2-pole
Ampacity: 60A
Voltage rating: 120/240V AC
Trip type: Thermal-magnetic, common trip
Mounting: Plug-on
Interrupt rating: 10 kAIC
Typical compatible wire range shown by listings: #14 to #2 AWG and up to #1/0 AWG depending on conductor material and termination conditions; verify the breaker label and current Eaton documentation before installation.
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.