4-Inch DB2 90° x 24-Inch Radius Bend with Bell End by Next Polymers 1490R24

Stock 7

DB2 4" Elbow 90 degree x 24" radius bend

SKU: NP-1490R24

4 in DB2 PVC conduit bend with a 90 deg sweep, 24 in radius, and bell end for underground electrical raceway changes in direction. Commonly used where a tighter sweep is needed in direct-burial or concrete-encased duct runs; verify conduit type, utility standard, and pulling requirements before ordering.

What this product is for

This 4 in DB2 PVC conduit bend is used to change direction by 90 deg in underground electrical conduit systems. The bell end allows connection to compatible DB2 conduit in direct-burial or concrete-encased installations.

Use for

Use for underground service raceways, duct banks, site electrical runs, and other nonmetallic conduit systems where a 90 deg change in direction is required. Suitable where 4 in conduit and a 24 in radius sweep match the project specification.

Avoid for

Avoid using this bend where a different conduit standard, larger sweep radius, or another end configuration is required. Do not assume interchangeability with DB2 fittings from every manufacturer without confirming dimensions and project approval.

Best for

Best for contractors and electricians installing underground PVC raceways that need a compact 90 deg directional change with a factory bell end. A 24 in radius is commonly selected where space is limited, but cable pulling conditions should still be reviewed.

Installed in

Typically installed in commercial, industrial, utility, and site servicing applications, including direct burial and concrete-encased duct banks. Actual acceptance depends on local code, utility standards, and engineer-of-record requirements.

Why this product exists

This fitting provides a controlled factory bend instead of field-bending straight conduit. It helps maintain system alignment and provides a bell end for joining to compatible conduit sections.

Compared with similar products

Compared with straight DB2 conduit, this fitting provides a fixed 90 deg change in direction. Compared with long-radius bends, a 24 in radius can help in tighter layouts, but a larger radius may be preferred for easier cable pulling depending on conductor size and run length. This is typical trade guidance only; actual performance depends on cable type, installation conditions, layout, and local electrical code.

Specifications

Product type: DB2 PVC conduit bend
Nominal trade size: 4 in (102 mm)
Bend angle: 90 deg
Radius: 24 in (610 mm)
End style: Bell end
Conduit type: DB2
Application: Underground electrical raceway, direct burial, or concrete encasement where approved
Brand: Next Polymers
Manufacturer part number: 1490R24

- SKU
  NP-1490R24
- Manufacturer Part #
  1490R24
Application
Underground electrical raceway, direct burial, or concrete encasement where
Conduit Type
DB2
Bend Angle
90 deg
Radius
24 in (610 mm)
Nominal Trade Size
4 in (102 mm)
End Style
Bell end
Brands
Next Polymers
Stock in Flesherton
7

Aptico Supply Delivery

Fast Electrical Supply Delivery Across Ontario

Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.

Shop Products Ask About Delivery

Real-Time Inventory

Contractor Delivery Routes

Elmira & Flesherton Pickup

Local Ontario Service

Delivery Built Around Electrical Contractors

Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.

Free Daily Delivery

Free daily delivery is available for larger contractor accounts.

Order by 9:00 AM for morning delivery
Order by 2:00 PM for afternoon delivery
Available in qualifying local delivery areas

Free Weekly Delivery

Free weekly delivery is available for smaller accounts in select service areas.

Elmira area delivery: Tuesday
Flesherton area delivery: Thursday
Order by 11:00 AM on the route day

Pickup Options

Pickup is available from our Ontario locations for customers who prefer to collect their order directly.

Elmira pickup available
Flesherton pickup available
Call ahead for large or special-order items

Local Delivery Areas

See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.

Delivery Questions

Do you offer free delivery?

Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.

Can I pick up my order?

Yes, pickup is available from our Elmira and Flesherton locations.

Do delivery charges apply?

Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.

Can you deliver to jobsites?

Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.

Need Electrical Supplies Delivered?

Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.

Contact Aptico Supply

We accept the following payment methods:

Accepted payment methods

To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.

This page is intended for your policy regarding returns and refunds.

Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.

To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.