Stock 3

DB2 4" Long Sweep 90 degree x 36" radius bend

SKU: IPE-4DB2904036

4 in DB2 PVC long sweep bend with bell end for underground conduit runs requiring a 90 deg change of direction. The 36 in radius helps reduce cable pulling friction compared with tighter bends and is commonly used in direct-buried or concrete-encased duct systems.

What this product is for

This 4 in DB2 long sweep bend is used to change direction in underground PVC conduit systems while maintaining a smoother cable path. It is suited to electrical duct banks, site services, and other below-grade raceway installations.

Use for

Use for 4 in underground PVC conduit runs, 90 deg changes in direction, and installations where a bell end helps join to matching conduit without a separate coupling on that end. Commonly used in direct-buried or concrete-encased raceways.

Avoid for

Avoid using where a different conduit type, wall rating, or bend radius is required by the project specification or local code. Do not assume compatibility with every PVC conduit system without confirming the matching duct type and joining method.

Best for

Best for underground power and service duct runs where pull tension and cable protection matter. A long sweep radius is typically preferred over a tighter elbow when conductors or cables need an easier pull path.

Installed in

Installed in underground electrical raceways at commercial, industrial, utility, and site infrastructure projects. Typical locations include duct banks, service entrances, and buried conduit transitions.

Why this product exists

This fitting provides a controlled 90 deg change in direction without the sharper turn of a standard elbow. The bell end simplifies joining to compatible conduit, and the 36 in (914 mm) sweep radius helps reduce drag during cable pulls. As typical guidance, long sweep bends are commonly chosen where easier pulling and reduced cable stress are priorities. Actual pulling performance depends on cable type, fill, lubricant, layout, and installation conditions.

Compared with similar products

Compared with a tighter-radius elbow, this DB2 long sweep bend offers a smoother path for conductors and cables. Compared with straight conduit plus separate field bending, it provides a consistent factory-formed bend and bell end connection. Confirm DB2 system compatibility before ordering.

Specifications

Trade size: 4 in
Metric equivalent: approximately 102 mm trade size
Angle: 90 deg
Bend radius: 36 in (914 mm)
Type: DB2 long sweep bend
End style: bell end
Material: PVC
Colour: gray
Typical application: underground conduit systems, direct burial, or concrete encasement where permitted by specification and code

- SKU
  IPE-4DB2904036
- Manufacturer Part #
  4DB2904036
Application
underground conduit systems, direct burial, or concrete encasement where pe
Material
PVC
Trade Size
4 in
Metric Equivalent
approximately 102 mm trade size
Angle
90 deg
Bend Radius
36 in (914 mm)
Colour
gray
End Style
Bell end
Brands
White Label
Stock in Elmira
3

Aptico Supply Delivery

Fast Electrical Supply Delivery Across Ontario

Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.

Shop Products Ask About Delivery

Real-Time Inventory

Contractor Delivery Routes

Elmira & Flesherton Pickup

Local Ontario Service

Delivery Built Around Electrical Contractors

Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.

Free Daily Delivery

Free daily delivery is available for larger contractor accounts.

Order by 9:00 AM for morning delivery
Order by 2:00 PM for afternoon delivery
Available in qualifying local delivery areas

Free Weekly Delivery

Free weekly delivery is available for smaller accounts in select service areas.

Elmira area delivery: Tuesday
Flesherton area delivery: Thursday
Order by 11:00 AM on the route day

Pickup Options

Pickup is available from our Ontario locations for customers who prefer to collect their order directly.

Elmira pickup available
Flesherton pickup available
Call ahead for large or special-order items

Local Delivery Areas

See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.

Delivery Questions

Do you offer free delivery?

Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.

Can I pick up my order?

Yes, pickup is available from our Elmira and Flesherton locations.

Do delivery charges apply?

Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.

Can you deliver to jobsites?

Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.

Need Electrical Supplies Delivered?

Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.

Contact Aptico Supply

We accept the following payment methods:

Accepted payment methods

To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.

This page is intended for your policy regarding returns and refunds.

Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.

To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.