- Stock 30
:
from
to
Clear
Clear
15-15-15 Amp Quad Pole Standard DNPL Circuit Breaker · Eaton DNPL151515
SKU: EAT-DNPL151515
Eaton DNPL151515 is a Type DNPL quadplex plug-in breaker for Eaton BR loadcentre applications, with four 15 A single-pole circuits on 120/240 V systems and a 10 kAIC interrupt rating. Commonly used where panel space is limited and additional 15 A branch circuits are needed; verify panel compatibility and local code before ordering.
What this product is for
This quadplex circuit breaker is used to add four 15 A single-pole branch circuits in compatible Eaton BR loadcentres while using less panel space than four full-width breakers. It is intended for overload and short-circuit protection on 120/240 V residential and light commercial distribution systems.
Use for
Use for panel retrofits, service upgrades, and space-constrained loadcentres where a listed Eaton Type DNPL quadplex breaker is required. Typical applications include lighting and general receptacle circuits where 15 A branch protection is specified.
Avoid for
Avoid using this breaker in panels not listed for Type DNPL or quadplex devices, or where a standard full-size breaker is required by the panel schedule. Do not assume interchangeability with BD, BRD, or other breaker families without confirming the exact loadcentre label and approval.
Best for
Best for electricians adding multiple 15 A circuits in compatible Eaton BR loadcentres without expanding the panel. It is also a practical choice when maintaining older Eaton or Cutler-Hammer residential distribution equipment that accepts this breaker format.
Installed in
Installed in compatible Eaton BR series loadcentres and similar approved panelboards. The breaker body is approximately 3 in deep x 3 in high x 1 in wide (about 76 x 76 x 25 mm).
Why this product exists
This breaker exists to increase circuit count in a limited panel footprint while maintaining branch-circuit protection. For contractors, it can help avoid a larger panel change when the existing loadcentre is listed to accept this style of breaker.
Compared with similar products
Compared with a duplex breaker, this quadplex format provides more branch circuits in the same general breaker space. Compared with newer BRD quad breakers, DNPL is an older Eaton catalogue family, so compatibility should be checked carefully against the loadcentre label and manufacturer literature before purchase.
Specifications
- Manufacturer: Eaton
- Manufacturer part number: DNPL151515
- Breaker type: Type DNPL quadplex plug-in circuit breaker
- Configuration: 15-15-15-15 A
- Amperage rating: four 15 A single-pole circuits
- Voltage rating: 120/240 V AC
- Interrupt rating: 10 kAIC at 120 Vac
- Application: Quadplex, independent trip
- Compatible family: Eaton BR loadcentre family, where listed
- Approximate dimensions: 3 x 3 x 1 in (76 x 76 x 25 mm)
- Typical branch-circuit guidance: 15 A circuits are commonly paired with #14 AWG copper conductors, subject to local code and equipment approval.
- Guidance only: Actual suitability depends on the panelboard listing, conductor type, installation conditions, and local electrical code.
- ApplicationQuadplex, independent trip
- Voltage120/240 V AC
- Interrupt Rating10 kAIC at 120 Vac
- Dimensions3 x 3 x 1 in (76 x 76 x 25 mm)
- Breaker TypeType DNPL quadplex plug-in circuit breaker
- Configuration15-15-15-15 A
- Amperage Ratingfour 15 A single-pole circuits
- Guidance OnlyActual suitability depends on the panelboard listing, conductor type, installation conditions, and local electrical code.
- Compatible FamilyEaton BR loadcentre family, where listed
- BrandsEaton
- Stock in Elmira9
- Stock in Flesherton11
Aptico Supply Delivery
Fast Electrical Supply Delivery Across Ontario
Local delivery routes, pickup options, and contractor-focused service from our Elmira and Flesherton locations.
Delivery Built Around Electrical Contractors
Aptico Supply helps electricians, contractors, and commercial buyers get the electrical materials they need without unnecessary delays. Whether you are ordering for a jobsite, restocking service inventory, or arranging pickup, our delivery options are designed to keep work moving.
Free Daily Delivery
Free daily delivery is available for larger contractor accounts.
- Order by 9:00 AM for morning delivery
- Order by 2:00 PM for afternoon delivery
- Available in qualifying local delivery areas
Free Weekly Delivery
Free weekly delivery is available for smaller accounts in select service areas.
- Elmira area delivery: Tuesday
- Flesherton area delivery: Thursday
- Order by 11:00 AM on the route day
Pickup Options
Pickup is available from our Ontario locations for customers who prefer to collect their order directly.
- Elmira pickup available
- Flesherton pickup available
- Call ahead for large or special-order items
Local Delivery Areas
See our local delivery coverage below. Delivery charges may apply outside regular route areas or for oversized items.
Delivery Questions
Do you offer free delivery?
Yes, free delivery is available for qualifying contractor accounts and selected local delivery routes.
Can I pick up my order?
Yes, pickup is available from our Elmira and Flesherton locations.
Do delivery charges apply?
Delivery charges may apply outside regular local routes, for smaller orders, or for oversized and heavy items.
Can you deliver to jobsites?
Yes, jobsite delivery may be available depending on the order size, location, and delivery schedule.
Need Electrical Supplies Delivered?
Contact Aptico Supply to confirm your delivery options, pickup availability, or contractor account eligibility.
Contact Aptico SupplyWe accept the following payment methods:
To replace this text with your store's actual info on payment methods, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Payment methods page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Design -> Menus & Pages -> Product Page Tabs" and edit the Return Policy page.