Terminal Block 6.2 mm Feed Through 26 10 Awg Green Din Rail Mount · Eaton XBUT4GN

What this product is for

The Eaton XBUT4GN is a single-level feed-through terminal block for terminating and joining conductors on DIN rail in industrial panels, control cabinets, and OEM equipment. It is intended for 26-10 AWG wiring and uses a screw connection for secure conductor termination.

Use for

Use for panel building, control wiring, machine wiring, and terminal strip assemblies where a green 6.2 mm feed-through block is required. It is commonly selected when electricians need organized point-to-point wiring on standard DIN rail.

Avoid for

Avoid using this block where a ground/PE terminal, fused terminal, disconnect terminal, or multi-level terminal is required. Also avoid it where conductor size exceeds 10 AWG or where a spring-clamp termination style is preferred.

Best for

Best for electricians, panel shops, and OEM builders needing a compact screw-type feed-through terminal block with CSA and UL recognition for control panel layouts.

Installed in

Typically installed in industrial control panels, MCC auxiliaries, machinery enclosures, automation cabinets, and commercial equipment panels on DIN rail.

Why this product exists

This product provides a compact, serviceable wire termination point that helps keep panel wiring organized, identifiable, and easier to maintain. Screw-clamp feed-through blocks are commonly used where technicians may need straightforward retightening or conductor changes during service.

Compared with similar products

Compared with narrower 2.5 mm class terminal blocks, this 6.2 mm model accepts larger conductors up to 10 AWG (4 mm2). Compared with ground blocks or fused blocks in the same family, this is a standard feed-through style for straight conductor pass-through rather than bonding or circuit protection.

Specifications

• Manufacturer: Eaton
• Manufacturer part number: XBUT4GN
• Product family: XB IEC terminal blocks
• Product type: Feed-through terminal block
• Connection type: Screw connection
• Level: Single level
• Mounting: DIN rail
• Colour: Green
• Terminal width: 6.2 mm (0.24 in)
• Wire range: 26-10 AWG
• Maximum conductor size: 10 AWG / 4 mm2
• Voltage rating: 600 V UL, 700 V EN, 800 V IEC
• Current rating: 30 A UL, 38 A EN, 41 A IEC
• Approximate length: 1.85 in (47 mm)
• Approximate height: 2.17 in (55 mm)
• Certifications: UL Listed, CSA Certified
• Typical buying note: A 6.2 mm feed-through block in this class is commonly chosen for control panel terminations where larger control or power conductors up to 10 AWG are needed. Actual suitability depends on conductor type, ferrules, torque, enclosure layout, and local electrical code.