Terminal Block 6.2 mm Feed Through 26 10 Awg Screw Connection · Eaton XBUT4WH

What this product is for

The Eaton XBUT4WH is a single-level feed-through terminal block for terminating and passing conductors through a DIN rail mounted terminal strip. It is used in control panels, machinery, OEM assemblies, and industrial electrical enclosures where clear, serviceable wire landing points are required.

Use for

Use for panel building, control wiring, marshalling circuits, and equipment terminations using 26-10 AWG conductors. It is commonly selected where screw-clamp terminations, white circuit identification, and compact 6.2 mm spacing are suitable.

Avoid for

Avoid using this terminal block where a fused, disconnect, ground, or multi-level terminal is required. Also avoid it for conductor sizes outside the listed wire range or where the application requires a different mounting or connection style.

Best for

Best for electricians, panel shops, and maintenance teams building DIN rail terminal assemblies in commercial and industrial control cabinets. It is a practical choice when you need a standard feed-through point with compact width and straightforward screw termination.

Installed in

Typically installed on DIN rail inside control panels, MCC auxiliaries, machinery cabinets, process skids, and automation enclosures. The body width is 6.2 mm, approximately 0.24 in, which helps when planning terminal density on the rail.

Why this product exists

This product provides a clean, modular way to terminate and distribute field wiring on DIN rail without splicing conductors in the enclosure. Compared with loose wire connectors, terminal blocks improve identification, servicing, and expansion of terminal strips.

Compared with similar products

Compared with fused or disconnect terminal blocks, this is a standard feed-through style for direct conductor-to-conductor termination. Compared with multi-level blocks, it uses a single-level format that is easier to access and label, but takes more rail length for the same circuit count.

Specifications

• Manufacturer: Eaton
• Manufacturer part number: XBUT4WH
• Series/family: XB IEC terminal blocks
• Type: Single-level feed-through terminal block
• Connection type: Screw connection
• Mounting: DIN rail mount
• Colour: White
• Terminal width: 6.2 mm (approximately 0.24 in)
• Wire range: 26-10 AWG
• Maximum conductor size: 10 AWG / 4 mm2
• Voltage rating: up to 800 V IEC, 700 V EN, 600 V UL
• Current rating: up to 41 A IEC, 38 A EN, 30 A UL
• Typical use: Control panel and industrial wiring terminations